Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Auto . Low . Medium . High Result: Each time you press the button, the indoor unit beeps. 5 To control the airflow direction, refer to page 20. 08'Moderato_IB_28593A_IB_E.indd 13 2007-12-27 9:05:51 E-14 Selecting Heat Mode You can select Heat mode if you want to heat your room. You can adjust the temperature and the fan speed when heating. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until Heat is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in Heat mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and 30°C. Result: . Each time you press the button: - The temperature adjusts by 1°C - The indoor unit beeps . If the room temperature reaches the set temperature (selected temperature+5°C), the air conditioner stops heating,but the fan is still operating. . The air conditioner starts heating, provided that the room temperature is lower than the desired temperature (selected temperature+3°C). 4 Press the button to select the fan speed until the required setting is displayed. Auto . Low . Medium . High Result: . Each time you press the button, the indoor unit beeps. . For the first 3~5 minutes, the fan may not operate to prevent cool air from flowing out of the indoor unit. This helps to warm the air in your room sufficiently. 5 To control the airflow direction, refer to page 20. 08'Moderato_IB_28593A_IB_E.indd 14 2007-12-27 9:05:54 E-15 ENGLISH Selecting Dry Mode Select Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until Dry is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 18°C and 30°C. Result: . Each time you press the button: - The temperature adjusts by 1°C - The indoor unit beeps . The air conditioner starts dehumidifying and the fan speed adjusts automatically. 4 To control the airflow direction, refer to page 20. 08'Moderato_IB_28593A_IB_E.indd 15 2007-12-27 9:05:56 E-16 Selecting Fan Mode Select Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit be...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - AQ09MSDN (10.56 mb)
Splitgeräte - AQ09MSDX (10.56 mb)
Splitgeräte - AQ09MWD (10.56 mb)
Splitgeräte - AQ09MWDN (10.56 mb)