Stimmen - 10, Durchschnittliche Bewertung: 3.9
(
)
)
|
Anleitung Zusammenfassung
9 ■ Installing and Connecting the Drain Hose of the Indoor Unit ............10 ■ Changing Direction of the Drain Hose............................................................11 ■ Installing and Connecting the Drain Hose of the Outdoor Unit ..........11 ■ Connecting the Assembly Cable ......................................................................12 Completing the Installation ■ Purging the Connected Pipes ..............................................................................13 ■ Performing the Gas LeakTests ............................................................................14 ■ Fixing the Indoor Unitin Place ............................................................................15 ■ Fixing the Outdoor Unit in Place ........................................................................16 ■ Final Check and Trial Operation ..........................................................................16 ■ Providing Information for User ............................................................................17 *# VIVACE_CIS_DB98-27056A_IM_E.indd 2 2007-1-5 17:07:12 Safety Precautions Keep this installation manual together with the user's manual in a handy place so that you can find it whenever you need to see it after reading this manual thoroughly. > Make sure to read the following safety precautions carefully before installation. I Make sure to observe the cautions specified in this manual. > Conduct a test run of the unit after installation and then explain all system functions to the owner. I The indications and meanings are as shown below. WARNING • This indicates the possibility of serious injury or death. ► Installation must be carried out by a qualified installer. ► Installers are required to read the general information carefully for safety. ► Do not put the unit near dangerous substances to prevent fire, explosion or injury and do not expose the unit to direct sunlight. ► Do not install the unit by yourself (owners). Incorrect installation of the unit could cause injury due to fire, electric shock and water leakage or from the unit falling. Consult a dealer ora qualified installer. ► Install the unit in a place where it is strong enough to hold the product weight. When installed in place where it is not strong enough to withhold the product weight, the unit could fall and cause injury. ► Use the specified wires to connect the indoor and outdoor units securely and attach the wires firmly to the terminal block connecting sections so that the pressure is not applied to the sections. Inappropriate connection and fixing could cause fire. ► Avoid the use of an extension cord and do not share the power outlet with other appliances. Incomplete connection, defective insulation or exceeding the permissible current may cause electric shock or fire. ► Make sure that the refrigerant gas does not leak after completing the installation. ► If the refrigerant gas of the indoor unit leaks and comes into contact with the fan heater, space heater or stove, harmful substances will be generated. ► Perform the installation securely referring to the installation manual. Incomplete installation could cause personal injury due to fire, electric shock and water leakage or from the unit falling. ► Attach the electrical cover to the indoor and outdoor unit securely. If not, it could result in fire or electric shock due to dust or water. ► Make sure to use the part provided or specified parts for the installation work. The use of defective parts could cause an injury or leakage of water due to a fire, an electric shock, the unit falling, etc. ► Make sure to turn off the main power when setting up the indoor unit electrical circuit or power cords. There is a risk of electric shock. VIVACE_CIS_DB98-27056A_IM_E.indd 3 2007-1-5 17:07:12 w WARNING • This indicates the possibility of serious injury or death. ► The unit should be installed in accordance with the National Electrical regulations. ► Ensure that the national safety code requirements have been followed for the main supply circuit. Ensure that a properly sized and connected ground wire is in place. ► Check ifthe voltage and the frequency of the main power supply are those required for the unit to be installed and check the connection. ► Make sure that properly sized disconnecting and safety switches are installed. ► Do not attempt to repair, move, modify or reinstall the unit on your own. Make sure that these installations are carried out by qualified personnel to avoid electric shock or fire. ► Use the unit on a single outlet circuit. Do not share the power outlet with other appliances. Obtain the consent by a qualified installer before connecting the unit to the power supply system. CAUTION • This indicates the possibility of serious injury or damage to environments when operated incorrectly. ► Check the unit for damage that may have taken place during transportation and do not install or use d...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - AQ09VBLX (4.77 mb)