![@name](/images/flag/s/en.gif)
![@name](/images/flag/s/es.gif)
Mesh screen on burner glows red when lit. After burner is lit, continue holding in safety shut-off valve plunger (about 10 - to 30 seconds) until heater stays lit. 5. If the burner does not light within 30 seconds, turn regulator knob to the “OFF” position. Wait at least two minutes for the gas to dissipate before relighting. 6. If heater will not light after repeated tries, do not attempt to repair heater. Return heater to nearest authorized service center or to the address on back of this ma