Powerware® Prestige Series Installation and Operator’s Manual for IBM Applications (3000 VA) Uncontrolled Copy CHAPTER 3 INSTALLATION The following sections describe UPS storage requirements and the installation and startup of the UPS. Unpacking and Inspection Carefully unpack the UPS and battery cabinets, making sure to retain the packaging materials. Examine each unit carefully for any signs of damage and immediately notify your distributor if damage is present. For assistance with the IBM 991

1400 VA 2U Rack Mount Uninterruptible Power Supply 100 Vac 990-7096, Revision 2 TABLE OF CONTENTS ENGLISH Chapter 1: Safety Information...................................................................1 Conventions Used in this Manual.................................................................................................1 Handling Safety............................................................................................................................1 Electrical Safety........

Get the power you need, save money and help protect the environment with Antec’s EA-550 Platinum! STANDARDS AND FEATURES The connectors and power specifications of the EA-550 Platinum PSU are all compatible with ATX12V v2.32 and EPS12V v2.92 specifications. The EA-550 Platinum features Universal Input, which automatically senses when you connect the power supply to any AC power source between 100 - 240V without setting a voltage switch. This power supply also features Active Power Factor Correct

That means the EarthWatts 650 consumes up to 33% less energy than an equivalent power supply with absolutely no reduction in excellent performance. On top of that, the EarthWatts 650 boasts universal input to automatically work on any power grid on the planet, and a 120mm fan to keep cool. UCC13# 0761345-27650-4 US UCC13# 0761345-04660-2 EC UCC13# 0761345-04661-9 GB Get the power you need, reduce your operating costs, and protect the environment with the EarthWatts 650! Safety Protection Over

Black Box Corporation. Surge Protectors The pr The prThe protection you need otection you needotection you need for your data lines. for your data lines.for your data lines. FEATURES • Protect against surges, damage caused by induced lightning, electrostatic discharges, noise, and ground loops. • Surge protectors are available for various network types. • Protectors are also available for various communication lines. • We even carry surge protectors for special equipment, such as CATV, keyboards

The device is supplied with a clip that fastens it to a belt or guitar strap. It uses a single 9-volt battery, providing an average life of 50 hours. The output of the B 29 L can be switched either to mic or line output level, depending on the downstream requirement. Both inputs to the B 29 L are mini-XLR-F, and the output is a standard XLR-M. The B 29 L effectively makes one output out of two. It is indispensible with small mixers, where it can expand the number of available inputs. In addition

The Surge Protector uses 600W Transient Voltage Suppressors to protect pins 2 through 8 and pin 20. It has one DB-25 male and one DB-25 female connector with all 25 pins passing straight through. The TvSs are connected between the ground screw and pins 2,3,4,5,6,7,8, and 20. The 232DSP will suppress any voltage levels above 12 volts without affecting the normal RS-232 data. The 232DSP is placed inline, between the data cable and the RS-232 port, as close to the protected port as possible. The g

HANDPUMPE (FALLS VERWENDET) Verwenden Sie das T-Stuck, um die Handpumpe mit dem + Eingang des Gerates und die Test-Ausrustung zu verbindern. Entleeren Sie das System mit der Handpumpe beim Drehen des Auslassventils nach links. Die Einstellung kann mit dem Feinregler an der Pumpe erfolgen; diese hat ein Feingewinde. Auslassventil schliessen und mit der Handpumpe zu pumpen, um den gewunschten Druck aufzubauen Die Feinreglung des gewunschten Druckes erfolgt durch Drehen des mit einem Gewinde verseh

Note the following: • Before installing a new screen protector, remove any screen protector that is already installed. A notch in the corner of the screen protector allows you to slide your fingernail or a firm, pliable implement (such as a credit card) under the screen protector for removal. Do not use a metal implement; it could scratch the screen. • To ensure good adhesion, clean the display screen with a soft cotton cloth dampened with denatured alcohol before installing the screen protect

• CSA Component Acceptance: 053787 C 000 & Class No: 1422 30. Environmental Data • Life Test: MIL-STD-202, Method 108A, Test Condition D • Load Humidity: MIL-STD-202, Method 103B • Moisture Resistance: MIL-STD-202, Method 106E • Thermal Shock: MIL-STD-202, Method 107D, air-to-air • Case Resistance: EIA/IS-722 • Resistance to Dissolution of Metallization: ANSI J-STD-002, Test D • Mechanical Shock: MIL-STD-202, Method 213B, Test Condition A • High Frequency Vibration: MIL-STD-202, Method 204D, Tes