Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
The Surge Protector uses 600W Transient Voltage Suppressors to protect pins 2 through 8 and pin 20. It has one DB-25 male and one DB-25 female connector with all 25 pins passing straight through. The TvSs are connected between the ground screw and pins 2,3,4,5,6,7,8, and 20. The 232DSP will suppress any voltage levels above 12 volts without affecting the normal RS-232 data. The 232DSP is placed inline, between the data cable and the RS-232 port, as close to the protected port as possible. The ground screw must be connected to earth ground. A minimum of 12 AWG copper wire is recommended. B&B’s Model CU15B is 1.5 x 0.016 in (38 x .25 mm) copper cut to length for ground connections that are longer than a few feet (one meter). If this device is not properly grounded it will not protect RS-232 lines. Specifications Clamping Voltage: Peak Pulse Power: Response Time: Typical Capacitance: Ground Screw: 12 volts 600 watts @ 1 msec. less than 1 picosecond 200 picofarads size 10# DECLARATION OF CONFORMITY Manufacturer’s Name: Manufacturer’s Address: Model Number: Description: Type: Application of Council Directive: Standards: B&B Electronics Manufacturing Company P.O. Box 1040 707 Dayton Road Ottawa, IL 61350 USA 232DSP RS-232 Surge Protector Light industrial ITE equipment 89/336/EEC EN 50082-1 EN 61000 (-4-2, -4-3, -4-4, -4-6) William H. Franklin III, Director of Engineering International Headquarters: B&B Electronics fllfg. Cn. 707 Dayton Road P.O. Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support@bb-elec.com B&B Electrunics Ltd Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax+353 91 792445 support@bb-europe.com...