Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Electrolux Dateigröße: 817.47 kb Dateiname: Unterrichtssprache:

USE GLOVES Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardless of condition. If the blade is cracked or damaged replace it with a new one. Please note If you have a machine fitted with BBC then you must remove both blade bolts (X3) Removing the Blade • Disconnect spark plug and allow engine exhaust to cool. • Turn machine on its side with the exhaust uppermost. 1. Use spanner to loosen blade bolt by turning anti-clockwise (X1). 2. Remove the blade bolt, blade and washer.(X2) 3. Inspect for damage and clean as necessary. BATTERY SAFETY (KEY START MODELS ONLY) Safety Procedures when Charging the Battery 1. Check the charger cable regularly for damage or deterioration due to age. 2. Do not use the lawnmower if the charging cable is not in good condition. 3. Do not attempt to charge other products with the charger from this unit. 4. Do not attempt to use this battery with any other charger. 5. Charging should only be carried out in a safe location where neither battery nor cord cable can be trodden on or tripped over. 6. Location should be well-ventilated. 7. During charging, the battery charger becomes warm. This is normal and means the charger is operating properly. 8. Do not cover the battery charger with anything during charging. 9. Ensure that neither the charger nor the battery are exposed to moisture. 10.Avoid extreme temperatures. 11.The charger will not operate below freezing point nor above 40oC. 12.Do not short circuit the battery terminals. Fitting the Blade 1. Fit the blade to the machine with the sharp edges pointing away from the machine. 2. Re-fit the blade bolt through the washer ensuring that the side stamped with ‘0’ on the washer is facing away from the blade (X2). 3. Hold firmly and tighten blade bolt firmly with a spanner. Do not over tighten. General Guidance on Rechargeable Battery 1. Charging time is 24 hours. 2. Under normal usage the battery will be charged during the running of the engine. 3. To keep in prime condition the battery should be charged at least once every six months. 4. Exceeding the charging period may shorten the battery life. 5. Protect electric cable. Never carry the battery charger by the electric cable only. 6. If after an extended usage period the battery quickly runs down after a full 24 hour charging period, a replacement battery is probably needed. 7. Do not attempt to open the main body casing. 8. Clean only with a dry soft cloth. 9. Never use a damp cloth or flammable liquids such as petrol, white spirits, thinners etc. 10.Dispose of old batteries safely. ENGLISH - 6 MAINTENANCE CHARGING THE BATTERY (KEY START MODELS ONLY) IMPORTANT:-Replacement batteries will need to be charged before use. Ensure that neither the charger nor the battery are exposed to moisture The battery pack can be replaced by unclipping the battery from its housing and disconnecting the battery pack from the battery leads. How to Charge the Battery 1. Stop your lawnmower. 2. Disconnect the spark plug. 3. Remove the cap from the charging point at the bottom of the wiring loom. Y1- Cap, Y2 - Charging Point, Y3 - Wiring Loom. 4. Plug charger lead into connection on battery loom 5. Plug the battery charger into a domestic electric socket. 6. Charging will then commence. 7. Charge for 24 hours. CARING At the End of the Mowing Season 1. Replace blade, bolts, nuts or screws, if necessary. 2. Clean your lawnmower thoroughly. Do not clean with chemicals, including petrol or solvents - s...

Herunterladen

Geben Sie zwei Ziffern: