|
Anleitung Zusammenfassung
Procedure Press the PIP button on the Remote Control to display the PIP frame. Note: The PIPpicture isthe same as the main picture, initially. To view a different picture in the PIP frame: • Press the TV/VIDEO button on the Remote Control to select the video PIP source. • Verify the CABLE BOX and VCR are ON and the VCR is tuned to channel 3 . • Choose channels for the PIP frame by pressing the CBL button on the Remote Control and using the numeric keypad or CH up/down buttons. • Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH up/down buttons. Note: The SWAP button switches the PIP and Main Picture source. Press the RECALL button for onscreen PIPand Main Picture sourcestatus. 9 1 TUNER PIP OPERATIONWITHA VCR - NO CABLE BOX 1 Tuner PIP Operation with a VCR - No Cable Box Note: Refer to the FEATURE COMPARISONCHARTon page 3 for your television PIP capability. This television includes a Picture In Picture (PIP) feature. A second video source (VCR) is required to provide a second picture. Connect your television to a VCR, as shown: VCR CONNECTIONS ON BACK OF TV CABLES NOT SUPPLIED COMPONENT VIDEO INPUT INPUT 1 R AUDIO L PBPR Y/VIDEO TO AUDIO AMP L R R AUDIO LINPUT 2 VIDEO S-VIDEO L R VIDEO OUT AUDIO OUT ANT IN ANT IN ANT OUT Incoming Cable Note: The Remote Control must be programmed with the supplied codes to operate the VCR. See Programming the Remote Control in the Remote Control Quick Reference Guide. Procedure Turn the VCR OFF and tune the TV to channel 3. Press the PIP button on the Remote Control to display the PIP frame on screen. Note: The PIPpicture isthe same as the Main picture, initially. • Press the TV/VIDEO button on the Remote Control to select the VIDEO PIP source. • Press the VCR button on the Remote Control and turn ON the VCR. • Press the TV/VCR button on the Remote Control. • Choose channels for PIP frame by pressing VCR CHANNEL up/down buttons on the Remote Control. • Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH up/down buttons. SWAP Button The SW A P button switches the PIP and Main Picture source. Press the RE C A L L button for on screen PIP and Main Picture source status. 10 2 TUNERPICTUREINPICTURE (PIP) OPERATION 2 Tuner Picture In Picture(PIP)Operation Note: Refer to the FEATURE COMPARISONCHARTon page 3 for your television PIP capability. PIP Operation with a VCR and Cable Box This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the same time without or with an external video source (VCR). Without A VCR (External Video Source) Procedure 1. Connect incoming cable to antenna (ANT) input on back of TV. 2. Press the PIP button on the Remote Control to display the PIP frame. Note: The audio isfor the Main Picture only. 3. Choose channels for the PIP frame by pressing the Remote Control PIP CHANNEL up/down buttons. 4. Choo...
Dieses Handbuch ist für folgende Modelle:Fernseher - CT27D11 (1.75 mb)
Fernseher - CT27D11U (1.75 mb)
Fernseher - CT27D21 (1.75 mb)
Fernseher - CT27D21U (1.75 mb)