Login:
heruntergeladen wurde: 0   Dateigröße: 267 kb   Hersteller: GE  
Kategorie: Friteusen
@name

hour 4 min 12 min 5 min/layer 45 min 5-6 min 5 min 15-20 min 5 min 10 min 20 min / lb 44 min / kg 5 min 30 min 5 min CLEVELAND TILTING SKILLET SIZE YOUR NEEDS: SKILLET SIZE GALLONS (LITRES): 10 Gal (40L) 15 Gal (60L) 30 Gal (115L) 40 Gal (150L) Method of Cooking Heat Setting Cooking Times POULTRY Chicken Breasts 8 oz (227g) Legs & Thighs 4 oz (113g) Roasting 5-6 lbs (2.27-2.72kg) Turkey Half – each 12 lb (5.44kg) Whole – 15 lb (6.8kg) 24 lb (10.9kg) cut in pcs SEAFOOD Fillets - 4 oz (113g) Fille

heruntergeladen wurde: 4   Dateigröße: 828 kb   Hersteller: GE  
Kategorie: Friteusen
@name

The use of other than factory supplied replacement parts wfll void the warranty. MODELS SEL AND SEM COVER VENT CAP AND DEFLECTOR Item No. Part No. Description Qty. 1 SK00105 Screw, Vi-20 x%* 1 2 SK50179 Washer 1 3-6 SK00054 Vent Cap Assy. 1 3 SK51032 Support Arm 1 4 SK50218 Knob 1 5 SK50131 Spacer 1 6 SK00059 Cover 1 7 SK50133 Spacer 1 8 SK50444 Knob *3,4 9 SK00175 Deflector Assy. (30 GaL) 1 SK00176 Deflector Assy. (40 GaL) 1 ♦The first figure represents the 30 gallon mode! and the

heruntergeladen wurde: 0   Dateigröße: 1 mb   Hersteller: GE  
Kategorie: Friteusen
@name

It should be minimum T WC natural gas or 12" WC LP gas. If gas pressure is correct replace defective gas control valve. 3. in an operating situation and with control thermostat set at #10. does the operating (upper) pilot fight go out too early? (Burners shut off too early) Yes No Go to step # 4. Go to step # 2. 4. Immediately after operating (upper) pilot goes out turn control thermostat to #1. Can you hear or feel the thermostat “clicking" off? Yes No. Adjust or replace safety thermostat (

heruntergeladen wurde: 21   Dateigröße: 1 mb   Hersteller: GE  
Kategorie: Friteusen
@name

40 gaL Gas Requlator N.G. 30 gaL Reducer bushing 3/4" to 1/2" Closed nipple 1/2" x 1-1/8" 1/2" Elbow Shut-off valve Nipple 1/2" x 2S1 Bracket Solenoid valve Compression elbow -1/4* tube to 1/8" pipe Pilot valve adjustment Pressure test spigot Bushing 3/8" to 1/8" Street tee 1/8"N. Compression connector 1/4"CC to 1/8"NPT Flame switch 1/8"NPT closed nipple 10 422-09TEA GAS CONTROL ASSEMBLY 9110 REVU 11 422-09DR PARTS LIST - BURNER BOX ASSEMBLY ITEM NO. PART NO. DESCRIPTION QTY. 1. 0717

heruntergeladen wurde: 1   Dateigröße: 1 mb   Hersteller: GE  
Kategorie: Friteusen
@name

End Piece) 1 SK50531 Heat Spreader (LH. End Piece) 1 SK5D532 Heat Spreader (with Thermostat cut-out) 1 SK50213 Heat Spreader (Plan) 3JS 15 SK50416 Washer, Spherical 28,36 16 FA21024 Nut, 5/16-18 28,36 Use only replacement parts which are factory supplied as to preserve trie certification of Underwriters Laboratories. American Gas Association, Canadian Standards Association or Canadian Gas Association (as applicable). The use of other than factory supplied replacement parts w81 void the

heruntergeladen wurde: 6   Dateigröße: 1 mb   Hersteller: GE  
Kategorie: Friteusen
@name

When checking pressure, be certain that all the equipment on the same gas line is turned to the "ON" position. 6. Make certain that new piping joints and connections have been made in a clean manner and have been purged, so that piping compound, chips, etc, will not dog pilots, valves, and/or controls. Use pipe joint sealant that is approved for use with liquified petroleum gas. 7. WARNING: Always check gas connections for leaks using soap solution or like means. DO NOT CHECK WITH OPEN FLAME.

heruntergeladen wurde: 8   Dateigröße: 1 mb   Hersteller: GE  
Kategorie: Friteusen
@name

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 2 KE001074 COMPONENT PLATE ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 3 KE601103 HUB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 5 REF. KE601109 LABEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 6 KE601081 SHAFT . . . .

heruntergeladen wurde: 4   Dateigröße: 1 mb   Hersteller: GE  
Kategorie: Friteusen
@name

These models are supplied with four 5/16"-18 weldnuts welded to underside of the base. 14 1/2” 24” FOUR 5/16”-18 THREADED FERRULES WELDED TO UNDERSIDE OF BASE FOUR 5/16”-18 THREADED FERRULES WELDED TO UNDERSIDE OF BASE 1 1/16” 7 3/8” 7 3/8” 19 1/2” 14 1/2” 24” 2 1/6” 10” 12 1/2” 1 3/8” SET-10 MOUNTING DIAGRAM SET-15 MOUNTING DIAGRAM Make four 3/8" holes in an existing stand or countertop, in order to secure the base of the skillet. Once the holes are made, screw the threaded rods into the ferrul

heruntergeladen wurde: 3   Dateigröße: 890 kb   Hersteller: GE  
Kategorie: Friteusen
@name

PART NO. DESCRIPTION L 077196-1 Momentary push button switch 2. G01499-1 Ground terminal 3. GO1268-2 Terminal block end GO1268-1 Terminal block section 4. 077190-2 Transformer 208,240,480,600V/120/24V 077190-4 Transformer 220V/120/24V 5. 1489800 Contactor - 480,600V 077062-2 Contactor - 208,220,240V 6. 077200-1 High limit 7. GO1296-3 Pilot light, green 8. G02315-2 Lamp^lashing red 9. GO1296-2 Pilot light, amber 10. G03054-2 Switch, on-off G03054-1 Switch, on-off-4

heruntergeladen wurde: 1   Dateigröße: 1 mb   Hersteller: GE  
Kategorie: Friteusen





Kategorien