Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Fotos und technische Daten Sony ICD-UX81 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press . or . on the control button to select “PLAY MODE,” and then press ENT. 3 Press . or . on the control button to select “1,” “,” “ALL,” “ 1,” “ ,” or “ ALL,” and then press ENT. 1 A message is played back. Messages in one folder are played back continuously. ALL All the messages are played back continuously. 1 One message is played back repeatedly. Messages in one folder are played back repeatedly. ALL All the messages are played back repeatedly. Playing back a specified section repeatedly – A-B Repeat 1 During playback, press (repeat) A-B to specify the starting point A. “A-B B?” is displayed. 2 Press (repeat) A-B again to specify the finishing point B. “ A-B” is displayed and the specified section is played back repeatedly. To resume normal playback Press ... To stop A-B Repeat playback Press . (stop). To change the segment specified for A-B Repeat playback During A-B Repeat playback, press A-B again to specify a new starting point A. Then specify a new finishing point B, as in step 2. Note You cannot specify the finishing point B before the starting point A that has been set. Adjusting the playback speed – the DPC function ., . ENT/MENU DPC (SPEED CTRL) When you slide the DPC (Digital Pitch Control) (SPEED CTRL) switch to “ON,” you can adjust the playback speed between +100% and –50%* of normal speed in the menu. The message is played back in natural tones thanks to the digital processing function. * You can only adjust the playback speed between 0 and –50% when messages are recorded as WMA files. 1 Slide the DPC (SPEED CTRL) switch to “ON.” 2 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 3 Press . or . on the control button to select “DPC,” and then press ENT. 4 Press . or . on the control button to adjust the speed of the playback. You can set the speed by 10% for + setting and by 5% for – setting. To resume normal playback Slide the DPC (SPEED CTRL) switch to “OFF.” Selecting the sound effect ., . ENT/MENU You can set the effect you want for the playback in the menu. However, when you play back using the built-in speaker, this setting is invalid. 1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press . or . on the control button to select “EFFECT,” and then press ENT. 3 Press . or . on the control button to select effect you want for the playback, and then press ENT. NOISE CUT Reduces distortion to make the human voice clearer. POP Stresses middle ranges, ideal for vocals. ROCK Emphasizes high and low ranges for a powerful sound. JAZZ Emphasizes high ranges for lively sound. BASS 1 Emphasizes the bass sound. BASS 2 Emphasizes the bass sound even more. OFF The EFFECT function does not work. Recording with other equipment Tape recorder, etc. To audio input connectorTo . (headphone) jack .. . To record the sound of the IC recorder with other equipment, connect the . (headphone) jack of the IC recorder to the audio input connector (minijack, stereo) of other equipment using an audio connecting cable*. 1 Connect the . (headphone) jack of the IC recorder to the audio input connector (stereo minijack) of other equipment using an audio connecting cable*. 2 Press .. to start playback and at the same time set the connected equipment to the recording mode. A message from the IC recorder will be recorded on the equipment connected. 3 Press . (stop) on the IC recorder and the connected equipment at the same time to stop recording. * Optional audio connecting cables (not supplied) To the IC recorder To the other equipment RK-G139 Stereo mini-plug (without resistor) Mini-plug (monaural) (without resistor) RK-G136 Stereo mini-plug (without resistor) Stereo mini-plug (without resistor) Note Your dealer may not handle some of the above listed optional accessories. Please ask the dealer for detailed information. Tip Before you start recording, we recommend you to make trial recording first. Playing Back a Message at a Desired Time with an Alarm ., . ENT/MENU . .. You can sound an alarm and start playback of a selected message at a desired time. You can have the message played back on a specified date, once every week, or at the same time every day. 1 Select the message you want to play back with an alarm. 2 Enter the alarm setting mode. . Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. . Press . or . on the control button to select “ALARM,” and then press ENT. . Press . or . on the control button to select “ON,” and then press ENT. 3 Set the alarm date and time. . Press . or . on the control button to select “DATE,” a day of the week, or “DAILY,” and then press ENT. . When you select “DATE”: Set the year, month, day, hour, and minute in sequence, as described in “Step 2: Setting the Clock” on page 18, then press ENT. When you select a day of the week or “DAILY”: Press . or . on the control button to set the hour a...
Dieses Handbuch ist für folgende Modelle:Diktiergeräte - ICD-UX71 (4.95 mb)
Diktiergeräte - ICD-UX71F (4.95 mb)
Diktiergeräte - ICD-UX81F (4.95 mb)