Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
ENT/MENU You can set the scanning sensitivity when presetting FM radio stations. The scanning sensitivity is set to “HIGH (SCAN H)” when you purchase the IC recorder. 1 Press and hold /MENU to enter the menu mode when listening to the FM radio. The menu mode window will be displayed. 2 Press . or . on the control button to select “SCAN SENSITIVITY” and then press ENT. 3 Press . or . on the control button to select “HIGH (SCAN H)” or “LOW (SCAN L),” and then press ENT. Presetting FM Radio Stations Manually ENT The display in the display window may be different from the actual one in some regions. You can preset up to 30 FM radio stations in the IC recorder’s memory. 1 Tune in the station you want to preset and store on the preset number. When a station you tune in is not a preset station, “P - -“ is displayed. 2 Press and hold ENT until a preset number flashes on the display. The station will be stored in memory. Listening to a Preset Radio Station ., . ENT/MENU . The display in the display window may be different from the actual one in some regions. 1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press . or . on the control button to select “FM RADIO,” and then press ENT. The IC recorder enters FM radio mode. 3 To tune in a station, press . or . on the control button repeatedly until the preset number you want is displayed. When you press and hold . or . on the control button, the preset numbers change rapidly. 4 Press . (stop) to turn the FM radio off. Erasing Preset FM Radio Stations ., . ENT/MENU . The display in the display window may be different from the actual one in some regions. 1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press . or . on the control button to select “FM RADIO,” and then press ENT. The IC recorder enters FM radio mode. 3 To tune in a station, press . or . on the control button repeatedly until the preset number you want to erase is displayed. 4 Press and hold ENT. The preset number and “ERASE?” will be displayed on the display. 5 Press . or . on the control button repeatedly to select “EXECUTE,” and then press ENT. The preset number will be changed to “P- -.” Troubleshooting 97GB Troubleshooting Troubleshooting Before taking the IC recorder for repair, check the following sections. Should any problem persist after you have made these checks, consult your nearest Sony dealer. Symptom Remedy The IC recorder cannot be turned off. Slide the HOLD switch in the direction of the arrow when the IC recorder is stopped (page 22). The IC recorder cannot be turned on. The HOLD switch is set. Slide the HOLD switch in the direction opposite that of the arrow (page 22). Display does not disappear. Display appears blurred. Remove the protective film on the display window before you use the IC recorder. The IC recorder does not operate. The battery has been inserted with incorrect polarity (page 13). The battery is weak (page 15). The buttons are locked with the HOLD switch (page 58). No sound comes from the speaker. The volume is turned down completely (page 39). Headphones are plugged in (page 40). When you are listening to the FM radio, “AUDIO OUTPUT” is set to “HEADPHONES.” Set it to “SPEAKER” (page 68). Sound comes from the speaker even when the headphones are plugged in. If you plug in the headphones not securely during playback, the sound may come from the speaker. Unplug the headphones and then insert them securely. When you are listening to the FM radio, “AUDIO OUTPUT” is set to “SPEAKER.” Set it to “HEADPHONES” (page 68). 98GB Symptom Remedy The operation indicator does not light. “LED” is set to “OFF” (page 70). Display the menu and set “LED” to “ON.” “MEMORY FULL” is displayed and you cannot start recording. The memory is full. Erase some of the messages (page 52) or erase all the messages after you store them on your computer. “FILE FULL” is displayed and you cannot operate the IC recorder. 99 messages have been recorded in the selected folder or 495 messages (when there are 5 folders) in total have been recorded. Therefore you cannot record another message, or move a message. Erase some of the messages (page 52) or erase all the messages after you store them on your computer. Recording is interrupted. The VOR function (page 30) is activated. Set “VOR” to “OFF” in the menu (page 64). Noise is heard. An object, such as your finger, etc., accidentally rubbed or scratched the IC recorder during recording so that noise was recorded. The IC recorder was placed near an AC power source, a fluorescent lamp or a mobile phone during recording or playback. Plug of the connected microphone was dirty when recording. Clean the plug. The . (headphones) plug is dirty. Clean the plug. Recording level is low. “MIC SENSITIVITY” (microphone sensitivity) is set to “LOW (L).” Display the menu and set “MIC SENSITIVITY” to “HIGH (H)” (page 28). Symptom Remedy When recording from other equipment, the input level is too strong ...
Dieses Handbuch ist für folgende Modelle:Diktiergeräte - ICD-UX71 (4.95 mb)
Diktiergeräte - ICD-UX71F (4.95 mb)
Diktiergeräte - ICD-UX81 (4.95 mb)