Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The menu mode window will be displayed. 2 Press . or . on the control button to select “REC MODE” and then press ENT. 3 Press . or . on the control button to select “ST,” “STSP,” “STLP,” “SP,” or “LP,” and then press ENT. ST : High-quality stereo recording mode (44.1 kHz/192 kbps) You can record with stereo high- quality sound. STSP : Standard play stereo recording mode (44.1 kHz/128 kbps) You can record with stereo sound. STLP : Long play stereo recording mode (22.05 kHz/48 kbps) You can record for a longer time with stereo sound. SP : Standard play monaural recording mode (44.1 kHz/32 kbps) You can record with standard quality sound. LP : Long play monaural recording mode (11.025 kHz/8 kbps) You can record for a longer time with monaural sound. To record with better sound quality, select the ST or STSP mode. Note You cannot set the recording mode while recording. Maximum recording time The maximum recording time of all the folders is as follows. ICD-UX71/UX71F ST mode STSP mode STLP mode 11 hr. 55 min. 17 hr. 55 min. 47 hr. 50 min. SP mode LP mode 71 hr. 45 min. 287 hr. 15 min. ICD-UX81/UX81F ST mode STSP mode STLP mode 23 hr. 55 min. 35 hr. 55 min. 95 hr. 55 min. SP mode LP mode 143 hr. 50 min. 575 hr. 35 min. ICD-UX91F ST mode STSP mode STLP mode 47 hr. 55 min. 72 hr. 192 hr. SP mode LP mode 288 hr. 1152 hr. 5 min. (hr. : hours/min. : minutes) Setting the microphone sensitivity ., . ENT/MENU You can set the microphone sensitivity in the menu when the IC recorder is stopped or is recording. The microphone sensitivity is set to “HIGH (H)” when you purchase the IC recorder. 1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press . or . on the control button to select “MIC SENSITIVITY,” and then press ENT. 3 Press . or . on the control button to select “HIGH (H),” “LOW (L),” and then press ENT. HIGH (H): To record at meetings or in a quiet and/or spacious place. LOW (L): To record dictation, or record in a noisy place. Cutting out low frequency – the LCF function ., . ENT/MENU When you set the LCF (Low Cut Filter) function to “ON” in the stop or recording mode, you cut out a low frequency to reduce the roaring noise from wind, etc.; therefore you can record a message more clearly. The LCF function is set to “OFF” when you purchase the IC recorder. 1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press . or . on the control button to select “LCF (LOW CUT),” and then press ENT. 3 Press . or . on the control button to select “ON,” and then press ENT. To cancel the LCF function Set “LCF (LOW CUT)” to “OFF” in step 3. Starting to record automatically in response to sound – the VOR function . ., . /MENUENT . You can set the VOR (Voice Operated Recording) function to “ON,” to make the IC recorder start recording when the IC recorder detects sound, and pause when no sound is heard, eliminating recording during soundless periods. The VOR function is set to “OFF” when you purchase the IC recorder. 1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press . or . on the control button to select “VOR,” and then press ENT. 3 Press . or . on the control button to select “ON,” and then press ENT. 4 Press . (stop) to exit the menu mode. 5 Press . (record/pause). “” and “” appear in the display window. The recording starts when the IC recorder detects sound. The recording pauses when no sound is detected and “” and “” flash. When the IC recorder detects sound again, the recording starts again. To cancel the VOR function Set “VOR” to “OFF” in step 3. Notes The VOR function is affected by the sound around you. Set “MIC SENSITIVITY” in the menu according to the recording conditions. If recording is not satisfactory after you have changed the microphone sensitivity, or for an important recording, set “VOR” to “OFF” in the menu. If you press . (record/pause) to pause recording when “VOR” is set to “ON” in the menu, only “” flashes. During synchronized recording (page 35) and FM recording (page 89), the VOR function does not work. Dividing a message into two during recording DIVIDE You can divide a message during recording so that the message is divided into two parts, and a new message number is added to the newer part of the divided message. Press DIVIDE during recording. “DIVIDING …” appears on the display and the new message number is added at the point you pressed the button. The message will be recorded as two messages, however recording continues without stopping. Message 1Message 2Message 3Message is divided. Message 2 and Message 3 are recorded without stopping. Tip You can divide the currently recorded message during recording pause. Notes You need a certain amount of free space in the memory to divide a message. For more information, see “System Limitations” on page 105. If 99 messages have been recorded in a folder, you cannot divide a message in that folder. Once a message is divided, you cannot re- comb...
Dieses Handbuch ist für folgende Modelle:Diktiergeräte - ICD-UX71 (4.95 mb)
Diktiergeräte - ICD-UX81 (4.95 mb)
Diktiergeräte - ICD-UX81F (4.95 mb)