Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Check whether it can be moved. You experience unpleasant odours. Strongly smelling food is not sealed. Cleaning the appliance. Seal strongly smelling food (see “Odours”, page 16). Ice maker/Ice and water dispenser Fault Possible cause: Remedial action No water can be drawn, ice is however given out. Fault with the appliance. It is necessary to inform customer service! Ice maker/Ice and water dispenser does not work. Ice maker is not connected to the mains supply. Call customer service. Childproof lock is activated. Swich off the childproof lock. Ice maker does not contain any fresh water. Ensure that the water is properly connected. If it is, call the customer service. The freezer space temperature is too high. Check the freezer space temperature. Reduce it where necessary. No water or ice is given out at the dispenser. Childproof lock is activated. Deactivate the lock. Water tank fills itself up. When first used, it takes approx. 2 minutes until the tank is filled. The appliance or ice maker has only just been switched on. Approx. 24 hours is needed until ice production starts. A lot of ice has been taken. Approx. 24 hours is needed until the ice cube container is filled again. The water filter is bunged up or used. Change the water filter. Fault Possible cause: Remedial action The ice maker does not make enough ice or the ice is deformed. The appliance or ice maker has only just been switched on. Approx. 24 hours is needed until ice production starts. A lot of ice has been taken. Approx. 24 hours is needed until the ice cube container is filled again. Low water pressure. The water pressure must be between 1.7 bar and 10 bar so that the appliance works properly. The water filter is bunged up or used. Change the water filter. The ice maker does not make any ice. The ice maker is switched off. Switch the ice maker on at the control panel. The appliance is not supplied with water. Contact the installer or the water supply company. Water supply has kinks. Turn off the water supply at the shut-off tap. Smoothen out the kinks, exchange where necessary. Low water pressure. The water pressure must be between 1.7 bar and 10 bar so that the appliance works properly. Temperature in the freezer space is too high. Temperature in the freezer space should lie between –17 °C and –18 °C, adjust where necessary. Ice cube container is not properly inserted. Check the position, re-insert where necessary. Incorrect shut-off tap installed. Incorrect taps can cause low water pressure and damage to the appliance. Condensation forms on the discharge unit of the dispenser. The ice maker is switched off. The condensation heating is deactivated. To switch the condensation heating on: – Switch on the ice maker. – Press the lock button and the agitation button simultaneously and keep pressed for 3 seconds. The water button and ice cube button flash twice. The ice maker is switched off, but the condensation heating function keeps working. To switch the condensation heating of...
Dieses Handbuch ist für folgende Modelle:Kühlen - G7146X0/03 (2.87 mb)
Kühlen - G7146X0/05 (2.87 mb)
Kühlen - G7146X0/06 (2.87 mb)
Kühlen - G7146X0/07 (2.87 mb)