Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
(System > Security > Change PIN) 3. When done, the PIN screen disappear. The message "All the settings will return to factory defaults." appears. 4. Select Yes. All settings are reset. The TV will turn off and on again automatically. The Setup screen appears. For more information about Setup, see the paper user manual. . Troubleshooting If your TV seems to be having a problem, access the troubleshooting guide for a solution. Software Update Menu > Support > Software Update The Software Update menu lets you upgrade your TV’s software to the latest version. Current Version: This is the software version already installed in the TV. Upgrading to the Latest Version you can upgrade in five ways: – By USB – Online – By Channel – Alternative Software – Standby Mode Upgrade The five methods are explained in the following pages. N Be careful not to turn off the power until the upgrade is complete. The TV will turn off and on automatically after completing the software upgrade. When you upgrade software, all video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade. . By USB To upgrade the By USB, follow these steps: 1. Visit 2. Click Support at the top of the page. 3. On the Support page, enter your model number in the Find Your Product field, and then press Enter or click Find Product. 4. Under Downloads on the left side, click Get downloads. The Download Centre screen appears. 5. Click Firmware on the left side of the page. 6. On the Firmware tab, click the file icon on the right, and then click Save File on the pop-up that appears. 7. Extracts the exe archive to your computer. You should have a single folder with the same name as the exe file. 8. Copy the folder to a USB flash drive. 9. Turn on the TV, and then insert the USB flash drive into the USB port of the TV. 10. In the TV’s menu, go to Support > Software Upgrade. 11. Select the By USB. N Please be careful not to remove the USB drive until the upgrade is complete. . Online The Online function lets you download the upgrade software directly from the Internet into your TV and then upgrade the software in one operation. To use Online, you must have configured your TV to connect to your network and the TV must be connected to the Internet. See the "Setting up the Network" instructions. To upgrade using the Online, follow these steps: 1. Select the Online. The Connecting to Server message appears. 2. If there is a download available, the Download popup appears with a progress bar and the download starts. 3. When the download is complete, the Upgrade Query screen appears with three choices: Upgrade Now, Upgrade Later, or Don't Upgrade. – If you select Upgrade Now, the TV upgrades the software, turns off, and then turns on automatically. – If you do not make a selection in one minute or select Upgrade Later, the TV stores the new upgrade software. You can upgrade the software later using the Alternative Software function. – If you select Don't Upgrade, the TV cancels the upgrade. . By Channel Upgrade the software using the broadcasting signal. N If the function is selected during the software transmission period, software will be automatically searched and downloaded. N The time required to download the software is determined by the signal status. . Alternative Software The Alternative Software option lets you upgrade using a file the TV downloaded earlier, but you decided not to install immediately, or a file downloaded by the TV in Standby Mode (See Standby Mode Upgrade in the next section). To upgrade using Alternative Software, follow these steps: 1. If upgrade software has been downloaded, you will see the software version number to the right of Alternative Software. 2. Select Alternative Software. 3. The TV displays a message asking if you want to upgrade. Select Yes. The TV begins the upgrade. 4. When the upgrade is complete, the TV turns off automatically, and then turns on. . Standby Mode Upgrade You can set the Standby Mode Upgrade function so that the TV downloads new upgrade software when it is in Standby mode. In Standby mode, the TV is off, but its Internet connection is active. This allows the TV to download upgrade software automatically, when you are not using it. Because the TV is turned on internally, the screen may glow slightly. This phenomenon may continue for more than 1 hour until the software download is complete. slightly. This phenomenon may continue for more than 1 hour until the software download is complete. To set Standby Mode Upgrade, follow these steps: 1. Select the Standby Mode Upgrade. 2. Select Off, 1 hour later, 2 hours later, 0:00, 2:00, 12:00 or 14:00. – Off: If you select Off, the TV will notify you with a pop up message when new upgrade software is available. – 1 hour later / 2 hours later / 0:00 / 2:00 / 12:00 / 14:00: The TV will automatically download new upgrade software when it is in Stand...
Dieses Handbuch ist für folgende Modelle:Fernseher - PS43E450A1W (2.15 mb)
Fernseher - PS51E550D1K (2.15 mb)
Fernseher - PS51E550D1P (2.15 mb)
Fernseher - PS51E550D1W (2.15 mb)