Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
TRS balanced inputs w/26dB pads and trim – expandable to total 16 inputs with optional AIB-8 board • Eight ANALOG compressors (Before A/D conversion), expandable to 16 with ACB-8 option • 32 track recorder plus a dedicated stereo master track – also used for track bouncing - a total of 272 virtual tracks! • 4 band fully parametric EQ per channel plus 8 band parametric master EQ • Up to 27 simultaneous effects per song: 24 inserts, 2 masters and a final song effect. Includes REMS mic, amp and cabinet effects (56bit) • Dynamic Automation with motorized faders plus 100 Scenes per song • 6 Locates and 100 Marks, and extensive digital editing of songs and tracks • 265 PCM rhythm / metronome patterns • Huge internal 80 GB IDE hard disk • Internal CDRW 24x16 CDRW for ripping, mastering and backup • USB for easy connection to computers – for backup and WAV file transfers • Digital expansion with optional DIB-8 ADAT-compatible board Quick Overview of Modes In this section, you’ll tour some powerful features of the D32XD while working with the 24bit/96k demo song. In the second section, you’ll create your own recording. Complete the first section now, so that you can become familiar with the main features, and get comfortable with navigation. You’ll find the well-designed top panel, TouchView display and dedicated knobs around the display make working with the D32XD a breeze! Transport controls shown as follows: [..] = RECORD [..] = PLAY [..] = STOP [..] = REWIND [..] = FAST FORWARD First, connect the AC power cable. Make sure that the MONITOR LEVEL knob or HEADPHONE level knob is turned down first, and then connect audio cables from the MONITOR OUT L/R jacks on the rear panel of the unit to your stereo powered monitor system (or connect headphones to the PHONES jack on the front panel). Press the [MAIN] power key on the rear panel .. press the [ON] key (under the red standby light) on the top panel. Work with one of the demo songs as you tour the mode keys: ! If the demo song “TAKE ME AWAY” is not already loaded in the D32XD, please restore it from the D32XD Factory Data CD that came with the unit. To restore the data, see the Owner’s Manual page 84, and then come back to this guide to continue…. 1. Press the [SONG] key then press the “SelectSong” tab in the display .. press “001: TAKE ME AWAY”, and then press “Select”. 2. Press the “Edit Song” tab .. press “Copy”, and then press to highlight “A: 001” in the display .. rotate the DIAL clockwise to the highest-numbered song displayed – this is the next available empty song location .. press “Yes”, and then press “OK”. 3. Now to un-protect the copied demo song: Press “Protect” .. press “OFF”, and then press “OK”. Note that the rest of the song edit functions are now visible and accessible in the display. 4. The song is set to loop continuously, but for the copied song, turn the loop feature off: Press the [REC/PLAY MODE] key located to the left of “LOOP” indicator (lit). Press “Loop Play” in the display to turn it off (unlit). 5. Press the [..] key to start playback of the demo song. Slowly raise the MONITOR or PHONE level knob to a comfortable listening position. [METER] Meter Track View The Meter Track View displays regions of audio, levels for playback tracks, effects, output levels as well as the currently selected virtual tracks, track names and locate points. As the song continues to play… 2. Press the [METER] key in the lower right corner of the adjustable display. 3. You can change this view to display CH-Input, Pre or Post Fader meter levels, and also select your choice of Track or Fader views. Try it: Press the “..” popup button in the upper left corner of the display .. under Select View: press “FaderView” then press “OK”. Now you’re viewing meter levels in addition to Fader and Pan settings for the song! [CH VIEW] Channel View This screen displays the settings and status of a single channel. Level, pan, effects, EQ, etc. are all accessible on one page! 1. Press the[..] key to stop song playback. 2. Press the [CH VIEW] key .. select different channels by pressings the [CH SELECT] keys (yellow) above the faders, or press the “CH” in the upper left corner of the display and use the DIAL to change channels. 3. Press the “Ch Routing” tab. Here you can view the signal flow for the selected channel. [TRACK] & [SCRUB] Virtual tracks and Track editing 1. Press the [TRACK] key. This screen displays the currently selected virtual track for each channel. You can name your tracks by pressing the “Rename” button in the display. There is also a handy time saving preset name list available! Press the “Rename” button, then press the ” Ў” popup next to the name. Here you can scroll through the list and select one of the preset names .. press “Cancel”. 2. Press the “MasterTrk” tab. There are eight virtual stereo master tracks available to mix (bounce) down to. These are used to bounce tracks and mixdown finished songs for CD burning. 3. Press the “EditTrk” tab, then press th...