Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 2.22 mb Dateiname: Unterrichtssprache:

Unlock the keypad1 Press and hold . » The keypad is unlocked. Locate the handset 1 Press on the base station. » All handsets connected to this base station ring. 2 Press on the base station again to stop ringing. » All handsets stop ringing; or 3 Press any key on one handset to stop ringing. 30 EN 13 Advanced settings Register the handsets You can register additional handsets to the base station.The base station can register up to 5 handsets. Auto registration1 Place the handset on the base station. » The handset detects the base station and star t to register automatically. » Registration is completed in less than 2 minutes.The base station automatically assigns a handset number to the handset. Manual registration If auto registration fails, register your handset manually to the base station. 1 Press menu on the handset. 2 Select [ADVANCED SET] > [REGISTER], then press [SELECT] to confirm. 3 Press and hold on the base station for 5 seconds until you hear a confirmation beep. 4 Enter the system PIN. Press [CLE AR] to make corrections. 5 Press [OK] to confirm the PIN. » Registration is completed in less than 2 minutes.The base automatically assigns a handset number to the handset. Note • If the PIN is incorrect or no base is found within a cer tain period, your handset displays a notification message. Repeat the above procedure if registration fails. Note • The preset PIN is 0000. No change can be made on it. Unregister the handsets 1 If two handsets share the same base stations, you can unregister a handset with another handset. 2 Press menu. 3 Select [ADVANCED SET] > [UNREGISTER], then press [SELECT] to confirm. 4 Enter the system PIN. (The preset PIN is 0000). Press [CLE AR] to remove the number. 5 Select the handset number to be unregistered. 6 Press [OK] to confirm. » The handset is unregistered. Tip • The handset number displays beside the handset name in standby mode. Restore default settings You can reset your phone settings to the original factor y settings. 1 Press menu. 2 Select [ADVANCED SET] > [RESET], then press [SELECT] to confirm. » The handset displays a confirmation request. 3 Press [OK] to confirm. » All settings are reset. » The welcome screen displays. Tip • For more information about the default settings, see the section on Default settings. English EN 31 14 Telephone answering machine Turn on the answering machine You can turn on the answering machine through the base station or the handset. Through the handset 1 Press menu. 2 Select [ANSWER MACHINE] > [ANSWER ON/OFF], then press [SELECT] to confirm. 3 Select [ON], then press [SELECT] to confirm. » The setting is saved. Through the base1 Press to turn on the answering machine in standby mode. Note • When the answering machine is switched on, it answers incoming calls after a cer tain number of rings based on the ring delay setting. Turn off the answering machine You can turn off the answering machine through the base unit or the handset. Through the handset 1 Press menu. 2 Select [ANSWER MACHINE] > [ANSWER ON/OFF], then press [SELECT] to confirm. 3 Select [OFF], then press [SELECT] to confirm. » The setting is saved. Through the base1 Press to turn off the answering machine in standby mode. Set the answering machine language Note • This feature only applies to models with multiple-language suppor t. The answering machine language is the language for the outgoing messages. 1 Press menu. 2 Select [ANSWER MACHINE] > [SETTINGS] > [VOICE LANGUAGE], then press [SELECT] to confirm. 3 Select a language, then press [SELECT] to confirm. » The setting is saved. Set the answer mode You can set the answering machine and select if the callers can leave messages. Select [ANSWER & REC.] if you allow the callers to leave messages. Select [ANSWER ONLY] if you forbid the callers to leave messages. 1 Press menu. 2 Select [ANSWER MACHINE] > [ANSWER MODE], then press [SELECT] to confirm. 3 Select an answer mode, then press [SELECT] to confirm. » The setting is saved. Note • If the memory is full, the answering machine switches to [ANSWER ONLY] mode automatically. 32 EN Outgoing messages (OGM) The outgoing message is the message your caller hears when the answering machine picks up the call.The answering machine has 2 prerecorded outgoing messages: the [ANSWER & REC.] mode and [ANSWER ONLY] mode. Record an outgoing message The maximum length of the outgoing message you can record is 3 minutes.The newly recorded outgoing message automatically replaces the old one. 1 Press menu. 2 Select [ANSWER MACHINE] > [RECORD OGM], then press [SELECT] to confirm. 3 Select [ANSWER & REC.] or [ANSWER ONLY ], then press [SELECT] to confirm. 4 Select [RECORD OGM], then press [SELECT] to confirm. 5 Recording star ts af ter the beep. 6 Press [OK] to stop recording or the recording stops after 3 minutes. » The recorded outgoing message plays back automatically for your review. Note • To restore the pre-recorded outgoing message, delete your current outgoing message. Listen to th...

Herunterladen

Geben Sie zwei Ziffern: