Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Dacor Dateigröße: 1.67 mb Dateiname: Unterrichtssprache:

NOTE: Do not remove the outer trim ring (lamp assembly). • Grasp the bulb and pull it straight out. • Replace with 12 volt, 20 watt halogen bulbs with a G4 base SUITABLE FOR USE IN OPEN LUMINAIRES. Follow package dir Follow package dirFollow package dirFollow package dirFollow package dirFollow package directions, wear gloves, do not ections, wear gloves, do notections, wear gloves, do notections, wear gloves, do notections, wear gloves, do notections, wear gloves, do not touch bulb with your bar touch bulb with your bartouch bulb with your bartouch bulb with your bartouch bulb with your bartouch bulb with your bare fingers. e fingers.e fingers.e fingers.e fingers.e fingers. • Replace inner cover by inserting the three retaining tabs into the three slots and pressing them firmly in place. Care and cleaning Optional Char Optional CharOptional CharOptional CharOptional CharOptional Charcoal Filters coal Filterscoal Filterscoal Filterscoal Filterscoal Filters If the model is not vented to the outside, the air will be recirculated through disposable charcoal filters that help remove smoke and odors. The charcoal filters cannot be cleaned. They must be replaced. The charcoal filters are clipped inside of each metal grease filter (mounting instructions included with charcoal filters kit). The charcoal filters should be replaced every 4-6 months (depending on hood usage). NOTE: NOTE:NOTE:NOTE:NOTE: NOTE: DO NOT rinse, or put charcoal filters in an automatic dishwasher. NOTE: NOTE:NOTE:NOTE:NOTE:NOTE: Charcoal filters are not notnotnotnot not included with the hood. They must be ordered from your supplier. Order the needed kit specifying your hood model and width size. Char CharCharCharCharCharcoal filter placement (Recir coal filter placement (Recircoal filter placement (Recircoal filter placement (Recircoal filter placement (Recircoal filter placement (Recirculating accessories) culating accessories)culating accessories)culating accessories)culating accessories)culating accessories) Fit the charcoal filter mattress on the upper side of each grease filter. Use provided springs to fix it in place. Note: Note:Note:Note:Note: Note: When removing for replacing for a new one do not remove Fixing Springs, simply pull out and rotate outwards. Cleaning CleaningCleaningCleaningCleaningCleaning • Always use the mildest cleaner that will do the job. Use clean, soft cloths, sponges or paper towels. • Rub stainless steel finishes in the direction of the grain. Wipe area dry to avoid water marks. • After cleaning, place all parts in their proper positions before using. The cleaners recommended below indicate a type and do not constitute an endorsement. Use all products according to package directions. Hood Surface Hood SurfaceHood SurfaceHood SurfaceHood SurfaceHood Surface Painted Surfaces: Painted Surfaces:Painted Surfaces:Painted Surfaces:Painted Surfaces:Painted Surfaces: For general care, wipe the outside of the hood with sudsy water or household cleaners such as Fantastic or Formula 409, rinse well and dry with a clean soft cloth to avoid water marks. Stainless Steel Surfaces: Stainless Steel Surfaces:Stainless Steel Surfaces:Stainless Steel Surfaces:Stainless Steel Surfaces:Stainless Steel Surfaces: Wipe and dry stainless steel in the same direction as the grain. Avoid using too much pressure, which may mar the surface. To remove finger prints and give added shine, use cleaners such as Stainless Steel Magic. Do not allow any cleaning compounds to remain in contact with stainless steel for extended periods. Plastic surfaces: Plastic surfaces:Plastic surfaces:Plastic surfaces:Plastic surfaces:Plastic surfaces: Wipe with a moist soapy sponge. Rinse and dry. Aluminum Mesh Filters: Clean filters in the dishwasher or by agitating in sudsy water. Ensure that there is no soil trapped in the fine mesh. Dry the filters before reinstalling them. Anodized Aluminum surfaces: Anodized Aluminum surfaces:Anodized Aluminum surfaces:Anodized Aluminum surfaces:Anodized Aluminum surfaces:Anodized Aluminum surfaces: Top cap is not removable. Wash top and underside with hot sudsy water. Rinse and wipe dry or apply Fantastic® or Formula 409® first to a clean sponge or paper towel and wipe clean. DO NOT USE powdered cleansers or steel wool pads. Warranty Information RANGE W RANGE WRANGE WRANGE WRANGE WRANGE WARRANTY ARRANTYARRANTYARRANTYARRANTYARRANTYYour range isprotected by this warranty In the U.S.A., In the U.S.A.,In the U.S.A.,In the U.S.A.,In the U.S.A.,In the U.S.A., your appliance is warranted by Electrolux Home Products North America, a division of White Consolidated Industries, Inc. ...

Herunterladen

Geben Sie zwei Ziffern: