Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Smeg Dateigröße: 1.06 mb Dateiname: Lennox_Hearth_UVFRC_UVF_Installation_700032M.pdf Unterrichtssprache:

Do not alter or modify the firebox or its com ponents under any circumstances. Any modification or alteration of the firebox system, including but not limited to the firebox and accessories, may void the warranty, listings and approvals of this system and could result in an unsafe and potentially dangerous installation. These Built-In Vent-Free Fireboxes have been tested and approved as Ventless Firebox Enclosures for Gas-Fired Unvented Decorative Room Heaters to ANSI Z21.91. Burn-in Period During the first few times of operation of this appliance there will be some odor due to the curing of the paint and burning off of lubricants used in the manufacturing process. We recommend that you open windows and ventilate the house during the initial burns. The paint emits non-toxic odors during this process. Depending on your use, the burn-in period may take a few hours or a few days. KEEP YOUR HOUSE WELL VENTILATED DURING THE BURN-IN PERIOD. THE ODOR AND HAZE EMITTED DURING THE BURN-IN PERIOD CAN BE QUITE NOTICEABLE AND MAY SET OFF A SMOKE DETECTOR. If an optional blower is installed, Do not turn it on during the Burn-In period. Misc. Codes / Standards - The Installation must conform to local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 -latest edition. The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70 - latest edition. Check the packaging list to be sure that you have all the necessary parts in usable condition. Also check for concealed damage. Tools and Building Supplies Normally Required Tools Should Include: • Phillips screwdriver • Hammer • Saw and/or sabersaw • Level • Measuring tape • Electric drill and bits • Pliers • Square • Piping complying with local codes • Pipe wrench • Tee joint • Pipe compound Building Supplies Should Include: • Framing materials • Wall fi nishing materials • Caulking materials (noncombustible) • Fireplace surround materials (noncombustible) • Insulation (for packing around gas-line penetration holes) CODES Adhere to all local codes or in their absence the latest edition of The National Fuel Gas Code ANSI Z223.1 or NFPA 54 which can be obtained from The American National Standards Institute, Inc. (1430 Broadway, New York, NY, 10018) or National Fire Protection Association, Inc. (Batterymarch Park, Quincy, MA, 02269). COMBUSTION AND VENTILATION AIR Heaters installed in these appliances shall not be installed in a confined space. Heaters installed in these appliances may be located in unusually tight construction provided the space is unconfined, or if confined, is provided with two permanent openings communicating directly with an additional room(s) of sufficient volume so that the combined volume of all connected spaces meets the criteria for an unconfined space, (National Fuel Gas Code ANSI Z223.1 1992, Section 5.3). Generally 50 ft 3 per 1,000 BTU ...

Herunterladen

Geben Sie zwei Ziffern: