Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
. . . . . . . . . . . . . . . .31 5.4 Reclining Infant Restraint/Base . . . . . . . . . . . . . . . . . . . .34 6.0 Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . .37-38 6.1 Airplane Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 6.2 Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . .37 Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-41 3 1.0 Registration Information Model Number: Serial Number: Purchase Date: 1.1 Register Your Infant Restraint Please fill in the above information. The model and serial numbers can be found on a label underneath your infant restraint. Fill out theprepaid registration postcard attached to the seat cover and mailit today. Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address and model/serial numbers to: Graco Children’s Products Inc. P.O. Box 100 Elverson, PA, 19520-9974 or call 1-888-224-6549 1.2 Recall Information • Call the U.S. Government’s Auto Safety Hotlineat 1-800-424-9393 (202-366-0123 in D.C. area) • • Graco: 1-888-224-6549 or 4 1.3 If You Need Help In the U.S.A. or Canada, please contact our Customer ServiceDepartment with any questions you may have concerning parts, use, or maintenance. When you contact us, please have your product’smodel and serial numbers ready so that we may help youefficiently. These numbers can be found on a sticker on the underside of your infant restraint. USA: 1-888-224-6549 or Canada: 1-800-667-8184 Montreal: 514-344-3533 5 2.0 Features and Components Each model of the infant restraint comes with different harness options. To adjust your infant restraint properly, it is veryimportant to follow the instructions that are appropriate for themodel you have purchased. OR 3-Point Harness 5-Point Harness Base Vehicle belt path 6 Boot (on certain models) 2.1 3-Point Harness Model FRONT VIEW: 3-POINT HARNESS HandleHarness slots Vehicle belt hook Handle adjustmentbuttonHarness clip Harness buckle Harness straps 7 REAR VIEW: 3-POINT HARNESS Level indicator* notch Owner Canopy Release handle ’s manual pocket LockingMountingHarness tightener clip** Harness anchor buckle Harness slot Attachment latch *Level The level indicator is attached to the side of Indicator the infant restraint, and indicates whether or not the infant restraint is properly reclined. The locking clip is stored on the bottom of **Locking the infant restraint. You will need to use it Clip with certain types of vehicle seat belts. 8 2.2 5-Point Harness Model FRONT VIEW: 5-POINT HARNESS Handle slots Handle adjustmentbutton Harness buckle Vehicle Harness belt adjustment hook button Harness Harness clip Harness Harness buckle tongues adjustment strap 9 REAR VIEW: 5-POINT HARNESS Mounting notch Level indicator* Harness slot Owner’pocket Attachment latch Metal junction plate strap Canopy Release handle s manual Harness adjustment Locking clip** Waist strapanchor buckle *Level The level indicator is attached to the side of Indicator the infant restraint, and indicates whether or not the infant restraint is properly reclined. The locking clip is stored on the bottom of **Locking the infant restraint. You will need to use it Clip with certain types of vehicle seat belts. 10 2.3 Removing and Attaching Base To remove infant restraint, squeeze handle atback of seat and lift infant restraint from base as shown ... To put infant restraint in base, push infantrestraint down until it clicks into base. Pull up on infant restraint to be sure it islatched firmly into base. 2.4 Adjusting Handle 1. Press handle adjustment buttons on both sides of handle ... 2. Rotate handle until it clicks into anyof three positions (for carrying, reclining, or sitting). BOTH handle adjustment buttons must pop outto lock handle in place ... 3. Push and pull on the handle to besure it is locked firmly in position. .. . Carrying . Reclining Sitting 11 2.5 Attaching Canopy 1. Infant restraint comes with four (two on certain models) identical . canopy support parts. Thread one canopy support completely through one sewn tunnel ... 2. Slide straight end of a secondsupport into the straight end of thefirst support ... 3. On models with four canopy . supports, repeat steps one andtwo for the other canopy tunnel. The canopy should appear asshown ... 4. Attach canopy in the areasbetween the infant restraint and the handle base ... .... 12 2.6 Head Support (on certain models) Some infants may need extra supportto keep their head and body in acomfortable position. Unsnap the sidesand resnap them with the harnessstraps threaded through the slots inthe cushion ... If your model does not includea head support, you may wantto use a rolled towel or a blanket for support ... MAKE SURE THAT NOTHING INTERFERES WITH THE HARNESS. It must still be flat and snug against yourchild’s shoulders. 2.7 Col...
Dieses Handbuch ist für folgende Modelle:Fahrräder - 6110 (3.52 mb)
Fahrräder - 6111 (3.52 mb)
Fahrräder - 6114 (3.52 mb)