2. To protect against a risk of electric shock, do not immerse the iron in water or other liquids. 3. The iron should always be turned to “Min” before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect. 4. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. 5. Always disconnect iron from electrical outlet when filling with water or emptying and whe

Use handles or knobs. • To protect against electrical hazards, do not immerse cord, plug, or the appliance in water or other liquid. • Close supervision is necessary when any appliance is used by or near children. • Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning. • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been dropped or damaged in any manner. Return app

Never yank cord to disconnect from outletjinstead,grasp plug and pull to disconnect. 4.Do not allow cord to touch hot surfaces.Let iron cool completely before putting away.Loop cord loosely around iron when storing. 5.Always disconnect iron from electrical outlet when filling with water or emptying and when not in use. 6.Do not operate iron with a damaged cord or if the iron has been dropped or damaged.To avoid the risk of electric shock, do not disassemble the iron, take it to a qualified se

Avocd eonlacl wilh water ar> sl&Qm 3. Once all ihs water has be«* drained tn Step 2, not" upon ovsr sink wllh Ihe soieplate ("it ing down Remaining drops o1 water will drain through Hie solvate vent&. Place the tot tior on rts heel aest so tha| any foenaming moisture will evaporate 4 Do not store iron unlil the Mleplate Is comp^tel^ coot 5 Loop cord loowly around iron when storing. Ort» Hi» sdeplal* has coded tomplelely: * Wipe lint ouitiw oi rhe iron and strieplate wilh a damp clctn Never

b) Move the steam selector dial(3) to “0FF”. c) Open the filler spout (2). d) Raise the tip of the iron to help the water enter the opening without overflowing. - Slowly pour the water into the reservoir using the water measuring cup (14) and taking care not to go over the maximum level (about 300ml) indicated by “MAX” on the reservoir (12). - Close the filler spout (2). 3 Selecting the temperature. - Put the iron in a vertical position. - Put the plug in the socket. - Adjust the thermostat knob

Never yank cord to disconnect from outlet; instead grasp plug and pull to disconnect. • Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around cord wrap when storing. • Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron, take it to a qualified serviceman for examination and repair. Incorrect reassembly can cause a risk of electric shock when t