Starting the Iron 1. Plug in the iron. 2. Press the PUSH ON Button and a green light will come on. (Figure B). 3. Use the HEAT SETTING GUIDE on the body of the iron to select the setting for the fabric to be ironed. (For more detail, see the “Fabric Ironing Chart” on page 11). 6 INDICATOR MARK INDICATOR MARK Figure C — Dry USING MOISTURE Figure D — Spray INDICATOR MARK Figure E — Surge INDICATOR MARK 4. Turn the TEMPERATURE SELECTOR DIAL to the appropriate setting and allow to preheat for approx

Tank 2 is for use with Downy Releaser® liquid for spray_require distilled or treated water ) GETTING STARTED Important: For warranty verification, do not remove Remove any labels, stickers or tags attached ordinary tap water for ironing. Do not use system. Important: For optimum performance, let the iron stand for to iron. FOR STEAM IRONING Filling Tank 1 with Water A B C D E 1. Open the water-fill cover (A). 2. Tilt the iron and using a clean measuring cup, pour water into opening until the wat

ANTI-DRIP SYSTEM The anti-drip system prevents water spotting at low temperatures. EMPTYING WATER TANK AFTER IRONING - OPTIONAL 1. Turn the fabric-select dial to Min. Unplug the iron and let it cool. 2. Open the water-fill cover. 3. Empty the water by holding the iron over a sink with the tip pointing down. Water will empty out of water-fill opening (H). Care and Cleaning This product contains no user serviceable parts. Refer service to qualified service personnel. CLEANING OUTSIDE SURFACES 1. M

Never yank cord to disconnect from outlet; instead grasp plug and pull to disconnect. . Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around cord wrap when storing. . Always disconnect iron from electrical outlet when filling with or emptying of water, and when not in use. . Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron, take it to a qu

10:36 AM Page 1 POR FAVOR LEA ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. VEUILLEZ LIRE ET CONSERVER CE GUIDE D’ENTRETIEN ET D’UTILISATION. SteamXpress ™ Iron Plancha Fer Models Modelos USA/Canada 1-800-231-9786 Mexico 01-800-714-2503 Modeles . AS200 Accessories/Parts (USA/Canada) Accesorios/Partes (EE.UU/Canada) Accessoires/Pieces (E.-U./Canada) 1-800-738-0245 . AS210 . AS225 . AS250 AS200Pub1000000145RV2 1/19/06 10:36 AM Page 2 IMPORTANT SAFETY INSTRUCTIONS When using your iron, basic safety p

If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. TAMPER-RESISTANT SCREW Warning : This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel. Note: If

How to Use This appliance is for household use only. GETTING STARTED Remove any labels, stickers or tags attached to the body or soleplate of the iron. Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system. TO FILL THE WATER TANK: 1. Open the water-fill cover as shown in (A) . Symbols Dry B C Steam/Blast of Steam Spray 2. Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the

Soleplate • It then glows on 7. When finished heat setting, and unplug the 3 4 A B C D E Surge of Steam Use to remove stubborn creases. 1. With water tank filled to the MAX mark, turn the fabric-select dial to at least setting 4 and wait for the temperature-ready light to go off. 2. To remove tough wrinkles, pump the button at 5-second intervals for a concentrated blast of steam. 3. When finished ironing, turn the fabric-select dial to lowest heat setting, move the dry/steam selector to and unpl

Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS. 7 Soft-Touch Parts Note: The soft-touch parts They are safe for individuals or sensitive to these POLARIZED PLUG (120V Models Only) This appliance has a polarized reduce the risk of electric shock, this plug If the plug does not fit fully into the contact a qualified electrician. Do not TAMPER-RESISTANT SCREW Warning : This appliance is equipp

1. Spray nozzle 2. Water-fill cover 3. Dry/Steam selector 4. Spray button 5. Surge-of-steam button 6. Comfort Grip ™ handle 7. Pivoting cord 8. Fabric guide 9. Heel rest 10. Temperature-ready indicator light 11. Fabric-select dial 12. Auto Clean ® button 13. Water tank 14. Soleplate Dry Steam/Blast of Steam Spray Symbols How to Use This appliance is for household use only. GETTING STARTED Remove any labels, stickers or tags attached to the body or soleplate of the iron. Note: Use ordinary