Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Safety first Caution must be used when handling this appliance as it does get very hot. Always switch off the unit and allow to cool before cleaning or storing. 40704 rev2 30/7/08 16:04 Page 1 2 IMPORTANT SAFETY INSTRUCTIONS The use of any electrical appliance requires the following common sense safety rules. Primarily there is danger of injury or death and secondly the danger of damage to the appliance. These are indicated in the text by the following two conventions: WARNING: Danger to the person! IMPORTANT: Damage to the appliance! In addition, we offer the following safety advice. Location • Do not use outdoors or near water. • The iron must be used and rested on a stable surface. Children • Close supervision is necessary when any appliance is used near children. • Children do not understand the dangers associated with operating electrical appliances. • Children should be supervised to ensure that they do not play with the appliance. Personal safety • WARNING: Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a steam iron upside down, there may be hot water in the water tank. • WARNING: To protect against the risk of electric shock, do not put the appliance in water or in any other liquid. • Do not use the vertical steam feature on clothes that are being worn. • Do not leave the iron unattended whilst plugged in or on an ironing board. Never allow the mains lead to over hang the work surface. • The socket should always be off before plugging or unplugging from the socket. Never yank the cord to disconnect from the socket, instead, grasp the plug and pull to disconnect. • Do not allow the cord to touch hot surfaces. Let the iron cool completely before putting away. Loop the cord loosely around the iron before storing. • The iron must not be left unattended while it is connected to the supply mains. • When placing the iron on it’s heel, ensure that the surface on which the heel is placed is stable. Other safety considerations • Use the iron only for it’s intended use. • Always disconnect the iron from the electrical socket when filling with water or emptying, and when not in use. • If the supply cord is damaged, it must be replaced by the manufacturer, it’s service agent or similarly qualified persons in order to avoid a hazard. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Do not operate the iron with a damaged cord, or if the iron has been dropped or damaged and if there are visible signs of damage, or if it is leaking. To avoid the risk of electric shock, do not disassemble the iron, but telephone Morphy Richards for advice. Incorrect reassembly can cause a risk of electric shock when the iron is used. Special instructions • If your iron does not work, check the following points: Has the temperature control been set to the required temperature? Is the plug in it’s socket? Is the plug itself or the socket faulty? (Check by plugging in another appliance). • WARNING: When not in use, your iron should never be placed flat and left on an ironing board. • To prevent damage to the textile being ironed, follow the temperature guide carefully. (Test the inside of the hem of the garment). • When ironing is complete, remove the plug from the socket, empty any remaining water from the tank, and allow to cool before storage. UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119 40704 rev2 30/7/08 16:04 Page 2 • If you drop or severely knock your iron, this could cause internal damage even if the outside appears alright. Have it checked by a qualified electrician. • It is recommended that you use up one beaker of water by operating your iron’s steam and shot of steam functions before ironing any clothes as some dripping may occur while your iron’s steam system is activated. ELECTRICAL REQUIREMENTS Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current). If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted. WARNING: The plug removed from the mains lead, if severed, must be destroyed, as a plug with a bared flexible cord is hazardous if engaged into a live socket outlet. Should the fuse in the 13 amp plug require changing, a 13 amp BS1362 fuse must be fitted. WARNING: This appliance must be earthed. Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care Labelling Code. Symbol (120°C Max) Cool (160°C Max) Warm (210°C Max) Hot Control knob positions Do not iron at all Fabric Nylon, Acetates e.g. Acrilan Courtelle, Orlon Triacetates, e.g. T...