Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word “DANGER” or “WARNING.” These words mean: wDANGER wWARNING You will be killed or seriously injured if you don’t follow instructions. You can be killed or seriously injured if you don’t follow instructions. All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. wWARNING Electrical Shock Hazard Plug into a grounded outlet. Do not remove ground. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Cut Hazard Always place cover on jar when blending. Do not put hands, spoons, or other utensils in jar when blending. Failure to follow these instructions can result in broken bones or cuts. Call our Technical Service number: 866-285-1087 or 910-692-2223 8 a.m. – 5:30 p.m. EST Monday – Thursday, 8 a.m. – 5:15 p.m. EST Friday (Requesting Assistance or Service Before calling for assistance or service, please check the “Troubleshooting Guide” in this manual. If you still need help, follow the instructions below. Whenever you call to request assistance or service, you need to know the complete model number. You can find this information on the label on the bottom of your blender. Please also record the purchase date of your equipment and your dealer’s name, address, and telephone number. Model Number__________________________ Purchase Date__________________________ Dealer Name ___________________________ Dealer Address _________________________ Dealer Phone___________________________ You can also order replacement parts by calling your nearest Hamilton Beach Commercial Service Center or your local dealer. Blender Safety IMPORTANT SAFETY INSTRUCTIONS WARNING – When using electrical appliances, basic safety precautions should be followed, including the following: • Read all instructions. • Plug into a grounded outlet. • Do not touch surfaces that may be hot. Use handles or knobs provided. • Extreme caution must be used when moving an appliance containing hot oil or other hot liquids. • Do not use appliance for other than intended use. • To protect against electrical shock, do not immerse cord, plug, or blender base in water or any other liquid. • Close supervision is necessary when any appliance is used by or near children. • The use of accessory attachments not recommended by Hamilton Beach may cause injuries. • To reduce risk of personal injury, unplug cord from outlet when not in use, and before putting on or taking off parts or doing any other servicing of the blender. • Do not let cord hang over edge of table or counter or touch hot surfaces. • Do not place on or near a hot gas or electric burner or in a heated oven. • To reduce risk of personal injury and to prevent damage to blender or jar and cutter assembly, DO NOT insert utensils into blender jar while operating blender, or store utensils in the blender jar when it is not in use. • Avoid contacting moving parts. • Blades are sharp. Handle carefully. • Inspect jar and cutter assembly daily. Check cutter for wear, nicks, or broken blades. Replace jar and cutter assembly at least every 12 months. • Do not defeat the jar pad sensors. • Do not use outdoors. • This appliance is intended for short periods of operation, with a rated operating time of 3 minutes. • To prevent damage to blender, jar, or cutter assembly, DO NOT move or shake blender while in operation. If blending action stops during operation, turn blender OFF, remove jar from base, remove jar cover, and use a thin rubber spatula to push mixture towards cutters. • Do not spray the base with a high-pressure spray gun. • Disconnect power before cleaning or servicing. • To prevent burns from hot liquids splashing out of the jar, always remove the filler cap of the container cover before blending hot liquids. • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest service facility for examination, repair, or electrical or mechanical adjustment. • If the supply cord of this appliance is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person. If fitted with a non-rewirable U.K. plug, the 13 amp fuse approved by ASTA to be B.S. 1362 must be used. If you need a replacement fuse carrier, it must be replaced by the same colour coded carrier with the same markings. Fuse covers and carriers can be obtained from approved service agents. IMPORTANT: If the molded plug is cut off, dispose of it immediately. The plug is not rewirable and would cause...