Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
DO NOT USE IN WET LOCATIONS. THIS TIMER HAS A BUILT-IN RECHARGEABLE BATTERY THAT IS USED TO RETAIN THE CURRENT TIME AND ON/OFF SETTINGS WHEN THE UNIT IS NOT PLUGGED IN AN OUTLET. IN CASE OF A FAILURE OF THE TIMER. PRESS THE RESET BUTTON TO RESTART THE TIMER. TO ACTIVATE YOUR TIMER 1. Display - Remove the plastic film from display. 2. Installation - Plug the timer into a grounded outlet and wait for at least 30 minutes to charge the built-in rechargeable battery. Once the battery has charged, unplug and press the “RESET” button. 3. Set Current Time - While holding down the CLK (Clock) button, press the DAY, HR (Hour) and MIN (Minute) buttons to set the day, hour and minute. Note the AM or PM appears after the time. 4. Release the CLK (Clock) button. Your Timer is now ready to be programmed. PROGRAMMING AN EVENT 1. Press the PROG button once. The display will read or if an event has already been programmed the current event will be displayed. It will show current settings if it has been previously The number 1 indicates that you are now programming Event until the day you choosen to program is displayed. 2. To select the day to be programmed press the DAY button repeatedly the display should show the day on which you want the timer to turn ON. The day options includes: -All days of the week (MO TU WE TH FR SA SU) -Any single day of the week (for example WE) - Weekdays only (MO TU WE TH FR) - Weekends only (SA SU) 3. Press the HR and MIN buttons to select the time of day to turn the Timer ON press the HR button repeatedly to change from AM to PM. 4. Press the PROG button again. The display will read: It will show current settings if it has been previously set. 5. Repeat steps 2 and 3 to program other events. 6. To set additional ON and OFF cycles (maximum of 7 events) press the PROG button and follow the procedures 2-5 above for each new ON/OFF event. When you are finished press the CLK button the display will now show the current time and the Timer will control the device plugged into it according to the programmed events. REVIEWING EVENTS Press the PROG button repeatedly and will cycle through all the programmed ON/OFF events. Press the CLK to return to normal operation. CLEARING PROGRAMMED EVENT Press the PROG button repeatedly to find the ON/OFF event you want to clear. While holding the MODE button down, press the PROG to clear the settings for the event. ACTIVATING YOUR EVENTS Automatic - For controlled operation according to programmed events, press the MODE button repeatedly until AUTO is displayed. Random - For random operation press the MODE button until RDM is displayed. The Timer will turn ON and OFF at +/- 30 Minutes of programmed events randomly. Manual - For manual operation, press the MODE button until ON (to turn and remain on) or OFF (to turn and remain off) is displayed. OPERATING THE TIMER Plug the Timer into an outlet near where you want time your lighting or appliance. Plug the lighting or appliance into the Timer. Check and adjust the Timer setting if needed. is a trademark of the General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114. This Jasco product comes with a 1 year limited warranty. Visit for details. Temporizador digital 15057-1 7/15/09 NO EXCEDA LA ESPECIFICACION DEL TEMPORIZADOR DE 1.000 VATIOS PARA PROPOSITO GENERAL Y CARGA DE TUNGSTENO (P. EJ. ILUMINACION). ESTE TEMPORIZADOR ES PARA USO EN ESPACIOS INTERIORES SOLAMENTE. NO UTILICE EN LUGARES HUMEDOS. ESTE TEMPORIZADOR TIENE UNA BATERIA RECARGABLE INCORPORADA QUE SE UTILIZA PARA MANTENER LA HORA ACTUAL Y LAS CONFIGURACIONES DE ENCENDIDO YAPAGADO CUANDO LA UNIDAD NO ESTA CONECTADA A UN TOMACORRIENTE. EN CASO DE FALLO DEL TEMPORIZADOR, PRESIONE EL BOTON DE REINICIO (RESET) PARA REINICIAR EL TEMPORIZADOR. PARA ACTIVAR SU TEMPORIZADOR: 1. Pantalla: Retire la pelicula plastica de la pantalla. 2. Instalacion: Conecte el temporizador a un tomacorriente con conexion a tierra y espere por lo menos 30 minutos a que cargue la bateria recargable incorporada. Una vez que la bateria se haya cargado, desconecte y presione el boton “RESET”. 3. Ajuste de la hora actual: Mientras mantiene presionado el boton CLK (reloj), presione los botones DAY (dia), HR (hora) y MIN (minutos) para ajustar el dia, la hora y los minutos. Note que aparece AM o PM despues de la hora. 4. Suelte el boton CLK (reloj). Ya puede programar su temporizador PROGRAMACION DE UN EVENTO 1. Presione el boton PROG una vez. Aparecera en la pantalla: o si ya se ha programado un evento, se mostrara en la pantalla el evento actual. Mostrara las configuraciones actuales, si se han fijado previamente. El numero 1 indica que usted esta programando el evento hasta que aparezca en la pantalla el dia que usted escogio programar. 2. Para seleccionar el dia que se va a programar, presione el boton DAY (dia) varias veces hasta que la pantalla muestre el dia en que desea que el temporizador se en...