Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Philips Dateigröße: 2.31 mb Dateiname: Unterrichtssprache:

Heat up the iron to maximum temperature and pass the iron over a piece of damp cloth for several minutes to remove any residues from the soleplate. The iron may give off some smoke when you use it for the first time This will cease after a short while. ENGLISH Preparing for use Filling the water tank C C C Remove the mains plug from the wall socket. Set the steam control to position O (= no steam). Open the filling cap. 1 2 3 (types GC2225, GC2220, GC2215, GC2130, GC2125 and GC2120 only) 4 Tilt the iron. 5 Use a measuring cup to fill the water tank up to maximum level. 6 Close the filling cap (click!). (types GC2225, GC2220, GC2215, GC2130, GC2125 and GC2120 only) If the tap water in your area is very hard, we advise you to use distilled water. Do not use vinegar, starch or chemically descaled water. Do not fill the water tank beyond the MAX indication. Setting the temperature 1 2 Put the iron on its heel. Set the temperature dial to the required ironing temperature by turning it to the appropriate position. -Check the garment label for the required ironing temperature. -1 Synthetic fabrics (e.g.acrylic,viscose,polyamide,polyester) -1 Silk -2 Wool -3 Cotton, linen -If you do not know what kind of fabric(s) a garment is made of, determine the right ironing temperature by ironing a part that will be invisible when you wear the garment. -Silk, woollen and synthetic materials; iron the reverse side of the fabric to prevent shiny patches. Avoid using the spray function to prevent stains. 3 4 Put the mains plug in an earthed wall socket. When the amber temperature light has gone out, wait a while before you start ironing. B The amber pilot light will go on from time to time during ironing. ENGLISH C C For versions with auto shut-off (types GC2225 and GC2130 only) (see also 'Other features') . If the automatic shut-off function has been activated (red pilot light blinks), move the iron slightly to deactivate this function (red pilot light stops blinking). Using the appliance Steam ironing Make sure that there is enough water in the water tank. 1 Set the temperature dial to the recommended position. See 'Setting the temperature'. 2 Set the steam control to the appropriate steam position. -A for minimum steam (temperature settings 2 and 3). -E for moderate steam (temperature settings 3 to MAX) (Types GC2225, GC2220, GC2215, GC2130, GC2125 and GC2120 only). -E for maximum steam (temperature settings 3 to MAX). B Steaming will start as soon as the set temperature has been reached. Types GC2215, GC2120, GC2115, GC2110 and GC2105 only Water may leak from the soleplate if the set temperature is too low (MIN to 2). GC2225, GC2220, G2130 and GC2125 only. The iron is equipped with a drip stop system (see also 'Other features). Ironing without steam 1 2 Set the steam control to position O (= no steam). Set the temperature dial to the recommended position. See 'Setting the temperature'. ENGLISH Other features Spraying C C C C Make sure that there is enough water in...

Herunterladen

Geben Sie zwei Ziffern: