Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Philips Dateigröße: 2.31 mb Dateiname: Unterrichtssprache:

Using the appliance Steam ironing Make sure that there is enough water in the water tank. 1 Set the temperature dial to the recommended position. See 'Setting the temperature'. 2 Set the steam control to the appropriate steam position. -A for minimum steam (temperature settings 2 and 3). -E for moderate steam (temperature settings 3 to MAX) (Types GC2225, GC2220, GC2215, GC2130, GC2125 and GC2120 only). -E for maximum steam (temperature settings 3 to MAX). B Steaming will start as soon as the set temperature has been reached. Types GC2215, GC2120, GC2115, GC2110 and GC2105 only Water may leak from the soleplate if the set temperature is too low (MIN to 2). GC2225, GC2220, G2130 and GC2125 only. The iron is equipped with a drip stop system (see also 'Other features). Ironing without steam 1 2 Set the steam control to position O (= no steam). Set the temperature dial to the recommended position. See 'Setting the temperature'. ENGLISH Other features Spraying C C C C Make sure that there is enough water in the water tank. Press the spray button several times to moisten the garment to be ironed. To remove stubborn creases at any temperature 1 2 Extra Steam (type GC2105 only) Set the steam control to maximum position E. Press and hold the Steam Control button down for max. 5 seconds. Wait at least 1 minute before using Extra Steam again to prevent water from dripping out of the soleplate. This function provides extra steam to remove really stubborn creases. The Extra Steam function only works at temperature settings between 3 and MAX. 1 2 3 Shot of Steam (GC2225, GC2220, GC2215, GC2130, GC2125, GC2120, GC2115 and GC2110 only) A powerful shot of steam helps to remove very stubborn creases. The Shot-of-Steam function only works at temperature settings between 2 and MAX. 1 Press and release the Shot-of-Steam button. ENGLISH C C Vertical Shot of Steam (types GC2225, GC2220, GC2215, GC2130, GC2125, GC2120 and GC2115 only) 1 The Shot-of-Steam function can also be used when you are holding the iron in vertical position.This is useful for removing creases from hanging clothes, curtains, etc. Never direct the steam towards people. Drip Stop (types GC2225, GC2220, GC2130 and GC2125 only) This iron is equipped with a drip stop function: the iron automatically stops steaming when the temperature is too low to prevent water from dripping out of the soleplate.When this happens you will hear a click. Automatic shut-off (types GC2225 and GC2130 only) Pick up the iron or move it slightly. The red auto-off pilot light will go out.The amber temperature pilot light will go on, depending on the soleplate temperature. If the amber pilot light goes on after the iron has been moved, wait for it to go out before you start ironing. If the amber light does not go on after the iron has been moved, the iron is ready for use. An electronic safety device will automatically switch the heating element off if the iron has not been moved for a while. . To indicate that the heating eleme...

Herunterladen

Geben Sie zwei Ziffern: