Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Braun Dateigröße: 3.03 mb Dateiname: Unterrichtssprache:

• The temperature pilot light (7) goes off, when the desired temperature is reached (after approx. 1 minute). C Ironing 1 Steam on/off For steam ironing, the temperature selector (6) must be set within the red range. Press the steam button (3) to start the steam mode. steam on steam off With the steam button in its upper position (steam on), turn the steam regulator (3a) to adjust the steam quantity. We recommend a medium steam setting for all normal ironing. Only when ironing linen, thick cotton or similar fabrics we recommend the maximum steam setting. Preconditioning (not with model SI 6120) Steam develops also horizontally at the front area of the sole plate. This preconditions the textiles by «pre-steaming», thus making ironing easier. Be careful – steam comes out laterally. 2 Power shot Prior to use, press the power shot button (5) 3 to 4 times to activate it. Press the power shot button in intervals of at least 5 seconds. Power shot can be activated when dry ironing. However, the temperature selector has to be set in the range between «•••» and «max». The power shot function can also be used in the vertical position for steaming hanging clothes (not with model SI 6120). 3 Spray function Press the spray button (4). 4 Dry ironing Turn the steam mode off by pressing the steam button (3) so that it catches in the lower position. D Automatic shut-off (model 6595/6265 only) The auto-off mechanism causes a slight rattling noise during ironing. This is normal and in no case indicates a fault of the iron. The «auto-off» pilot light will flash when the automatic shut-off is activated. This happens when the iron has rested … – horizontally on its sole plate for about 30 seconds or – vertically on its heel rest for about 8/15 minutes. To turn on the iron again, just move it. When the «auto-off» pilot light stops flashing, the electrical power is on again. The automatic shut-off will be activated approximately 2 minutes after the iron is plugged into a socket. E Textile Protector (models 6590/6595 only) Before attaching the Textile Protector (9) for the first time, iron approximately 2 minutes without the Textile Protector. The Braun Textile Protector protects delicate fabrics from heat damage and makes it possible to iron most dark fabrics without an intermediate cloth. To check the reaction of your fabrics before you start ironing, we recommend that you iron a small section of material on the reverse side. With the Protector, you are able to iron delicate fabrics with the temperature setting «•••» or «max», so that you can use all steam functions your iron offers. After having attached the Textile Protector, wait about 11/2 minutes before you start ironing. Always store your iron with the Textile Protector detached. F After ironing • Unplug the iron and press the steam on/off button (3) so that it catches in its lower position (steam off). • To prolong the life of the iron, empty the water tank. • Store the cool iron in a dry place always standing on...

Herunterladen

Geben Sie zwei Ziffern: