Operator Guide GA32-0330-13 Note! Before using this information and the product it supports, be sure to read the general information under “Notices” on page 115. Fourteenth Edition (October 2001) This edition of the IBM TotalStorage™ Enterprise Tape System 3590 Operator Guide , GA32-0330-13, obsoletes and replaces GA32-0330-12. Changes or additions are indicated by an asterisk or pound sign in the left margin. The following paragraph does not apply to any country where such provisions are incons

6. Click Add. Enter the IP address of the Sun Storage 7000 Unified Storage System. Click OK. 7. Click Close. 8. Click the Rescan link to have VMware ESX discover the Sun Storage 7000 Unified Storage System iSCSI LUNs. 9. It is recommended that you enable any CHAP configuration after all iSCSI LUNs have been discovered. 10. After the Rescan completes, select Configuration -> Storage to add the iSCSI LUN as a DiskDevice and create a VMFS3 file system on the LUN. Optionally the iSCSI LUN can be use

Read and follow the safety tips. See page 2. . Install the enclosure in an equipment rack or tower assembly (optional.) See page 2. . Install the drive carriers. See page 6. . Set the drive slot and enclosure IDs. See page 7. . Connect the I/O cables. See page 7. . Connect the AC power cords to the APC modules. See page 11. . Follow the instructions in Next Steps on page 11. 1 Safety Tips ! Caution: A fully loaded enclosure is heavy. Reduce the weight of the enclosure by removing the drive carri

Remove all of the components from the packaging and place them on an antistatic surface until you are ready to use them. If you are using new disk drives, place them so they acclimate to room temperature before you install them in the enclosure and power on the system. Before continuing, inspect the components for shipping damage. Ensure that you have the tools you require for rack or tower assembly installation: ¦ Phillips-head screwdriver ¦ Wrench for tightening nuts (if your rack does not hav

To update the status of a storage enclosure: 1 Open Adaptec Storage Examiner. 2 In the tree, right-click on the enclosure you want to update. 3 Select Update Status. To update the status of every storage enclosure attached to a host: 1 Open Adaptec Storage Examiner. 2 In the tree, right-click on the host you want to update. 3 Select Update Status. To update the status of the storage enclosures attached to every host in the network: 1 Open Adaptec Storage Examiner. 2 In the tree, right-click on t

hp ultrium cleaning cartridgehp cleaning cartridge C7979Acartridge storageTo prevent condensation and for long life, the cartridge should only be operated or

hp ultrium 200GB data cartridgehp ultrium 200GB data cartridge C7971A This cartridge is designed to provide trouble-free performance on any device bearing the

hp ultrium 100GB data cartridgehp ultrium 100GB data cartridge C7970A This cartridge is designed to provide trouble-free performance on any device bearing the

Important notesThis section provides information you should be aware of when running Fabric OS 3.2.1.OS requirementsHP recommends using the latest software