Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Reebok Fitness Dateigröße: 857.8 kb Dateiname: e69c3108-17d8-4034-94e6-a1c7d97d016e.pdf Unterrichtssprache:

Make sure the flat side of the closed loop is turned towards the Upright. Make sure the Long Cable is attached on the indicated side of the Press Upright. Route the threaded end of the Long Cable around the “V”-Pulley (6) on the Press Frame (17) in the direction shown. Route the Long Cable around the “V”-Pulley (6) on the Press Upright (56) in the direction shown. Route the Long Cable around the 3 1/3” Pulley (15) on the Press Upright in the direction shown. 27 26. Attach a “V”-Pulley (6) and a Long Cable Trap (50) to the bracket on the Press Seat Frame (77) with a 3/8” x 2 1/2” Bolt (7) and a 3/8” Nylon Locknut (21). It may be necessary to place the Long Cable Trap on top of the bracket. Make sure the Long Cable Trap is positioned as shown. Attach two 3 1/2” Pulleys (15) and two Cable Traps (66) to the Leg Press Arm (89) with a 3/8” x 4 1/2” Bolt (79) and a 3/8” Nylon Jam Nut (83). Make sure the Cable Traps are positioned as shown. 26 66 83 21 15 66 79 6 50 7 77 58 22 3 6 17 8 6 15 56 89 28. Route the Long Cable (58) around the indicated 3 1/2” Pulley (15) on the Leg Press Arm (89) in the direction shown. Route the Long Cable around the “V”-Pulley (6) on the Press Seat Frame (77) in the direction shown. 28 77 15 6 89 29. Move to the other side of the unit. Route the Long Cable (58) around the second 3 1/2” Pulley (15) on the Leg Press Arm (89) in the direction shown. 30. Route the Long Cable (58) around the 3 1/2” Pulley (15) on the Butterfly Base (4). Attach the Long Cable to the Long “U”-Bracket (57) with a 1/4” Nylon Locknut (2) and a 1/4” Flat Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing. 31. Locate the Medium Cable (86). It has a closed loop on one end and a ball on the other. Wrap the end of the Medium Cable with the ball around a 3 1/2” Pulley (15) in the direction shown. Attach the Pulley to the Butterfly Upright (42) with a 3/8” x 3 3/4” Bolt (71), a 3/8” Flat Washer (9) and a 3/8” Nylon Jam Nut (83). 32. Wrap the Medium Cable (86) around a 3 1/2” Pulley (15) in the direction shown. Attach the 3 1/2” Pulley (15) and a Cable Trap (66) to the two “I”-plates (81) with a 3/8” x 2“ Bolt (12) and a 3/8” Nylon Locknut (21). Make sure the Cable Trap (66) is positioned as shown. 30 31 29 15 89 10 57 2 57 15 4 71 15 86 83 9 42 58 58 2 10 32 66 15 81 86 21 12 14 15 35. Locate and open the parts bag labeled “Seat Assembly.” Attach the Backrest (41) with the name decal to the Press Upright (56) with two 1/4” x 2 1/2” Screws (43) and two 1/4” Flat Washers (10). Seat Assembly 35 33. Remove the 3 1/2” Pulley (15) from the Long “U”- Bracket (57). Route the Medium Cable (86) around the Pulley in the direction shown. Re-attach the Pulley to the Long “U”-Bracket (57) with the 3/8” x 2” Bolt (12) and the 3/8” Nylon Locknut (21). Make sure the Cable Trap (66) is positioned as shown. 33 15 57 66 86 41 43 10 43 10 34. Attach the closed loop on the end of the Medium Cable (86) to the Top Frame (55) with a 5/16” x 2 3/4” Bolt (11), a 5/16” Flat Washer (8) and a 5/16” Nylon Locknut (3). Make sure the flat side of the closed loop is turned towards the Top Frame. 34 3 8 11 55 86 56 21 12 36. Insert the 1/4” x 2 1/2” Carriage Bolt (91) into the center hole in a Seat Plate (37). Attach the Seat Plate to a Seat (13) with two 1/4” x 3/4” Screws (18). Insert the 1/4” x 2 1/2” Carriage Bolt (91) into the indicated hole in the Press Seat Frame (77). Tighten a 1/4” Nylon Locknut (2) with a 1/4” Flat Washer (10) onto the Carriage Bolt. 36 91 13 37 18 2 77 10 16 38. Move to the other end of the unit. Attach the remaining Backrest (41) to the Butterfly Upright (42) with two 1/4” x 2 1/2” Screws (43) and two 1/4” Flat Washers (10). 38 37. Attach the other end of the Seat (13) to the Press Seat...

Herunterladen

Geben Sie zwei Ziffern: