Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
STEP 1 (See Diagram 1) A.) Attach the Rear Stabilizer (#45) to the Base Frame (#1). Secure it with two M10 x 3 .” Carriage Bolts (#48), . .” Washers (#10) and M10 Aircraft Nuts (#11). B.) Attach a U-shaped Bracket (#36) to the Base Frame (#1). Secure it with a M10 x 2 .” Allen Bolt (#44), two .3/4” Washers (#10) and a M10 Aircraft Nut (#11). C.) Attach the Main Frame (#12) to the Base Frame (#1). Secure the bottom beam with two M10 x 2 .” Carriage Bolts (#35), .3/4” Washers (#10), and M10 Aircraft Nuts (#11). Secure the upper beam to the U-shaped Bracket (#36) with a M10 x 2 .” Allen Bolts (#44), two . .” Washers (#10), and one M10 Aircraft Nut (#11). D.) Insert the Seat Adjustment Frame (#41) into the opening on the Base Frame (#1). Insert a Lock Knob (#3) to secure the seat position. E.) Insert the Foot Adjustment Frame (#5) into the opening on the front of the Base Frame. Insert a Lock Knob (#3) to secure the position. DIAGRAM 1 4 STEP 2 (See Diagram 2) A.) Slide a .1 .” Plastic Washer (#23) onto the axle on the Adjustment Plate (#25). Insert the axle through the barrel on the Main Frame. Slide another .1 .” Plastic Washer (#23) onto the axle. B.) Slide the Weight Holder Bar (#13) onto the axle. Align the holes and insert a Roll Pin (#22) through the hole. Use a hammer to drive in the Roll Pin. C.) Attach the Swing Arm (#34) to the axle. Secure it with a M10 x .” Allen Bolt (#32) and . 1 3/8” Washer (#31). Attach the T-shaped Pull Pin (#33) onto the Swing Arm to lock the plate in position. D.) Slide the Olympic Sleeve (#14) onto the Weight Holder (#13). Clip the Spring Clip (#17) onto the Olympic Sleeve. Plug the Olympic Sleeve End Cap (#15) into the end. DIAGRAM 2 5 STEP 3 (See Diagram 3) A.) Attach the Seat Pad (#40) to the Seat Adjustment Frame (#41). Secure it with four M8 x 1 3/8” Allen Bolts (#43) and . 5/8” Washers (#42). B.) Slide a .2” Washer (#49) onto the rod on the Swing Arm (#34). Push the Large Foam Roll (#37) onto the rod. Secure it with a .2” End Cap (#38) and M10 x .” Allen Bolt (#32). C.) Insert two Foam Roll Tubes (#6) halfway through the holes on the Foot Adjustment Frame (#5). Push two Foam Rolls (#8) onto the top tube. Plug two .1” Foam Roll End Caps (#9) to the ends. D.) Slide two Handle Grips onto the bottom tube. DIAGRAM 3 6 7 PARTS LIST KEY NO. DESCRIPTION Q’ty Base Frame 1 2” Square Sleeve 3 Lock Knob 2 1 .” Square End Cap 3 Foot Adjustment Frame 1 Foam Roll Tube 2 Handle Grip 2 Foam Roll 2 . 1” Foam Roll End Cap 2 . .” Washer 8 M10 Aircraft Nut 6 Main Frame 1 Weight Holder Bar 1 Olympic Sleeve 1 Olympic Sleeve End Cap 1 Spring Clip Sleeve 2 Spring Clip 1 M10 x .” Allen Bolt 1 Bumper 1 Stopper 1 Spring 1 Roll Pin 1 .1 .” Plastic Washer 2 Bearing 2 Adjustment Plate 1 Lever 1 .1/2” Washer 2 M6 x 1 1/8” Philips Screw 1 M6 Aircraft Nut 1 2” Square End Cap 2 . 1 3/8” Washer 1 M10 x .” Allen Bolt 2 T-shaped Pull Pin 1 Swing Arm 1 M10 x 2 .” Carriage Bolt 2 U-shaped Bracket 1 Large Foam Roll 1 .2” End Cap 1 1 .” Square End Cap 1 Seat Pad 1 Seat Adjustment Frame 1 . 5/8” Washer 4 M8 x 1 3/8” Allen Bolt 4 M10 x 2 .” Allen Bolt 2 Rear Stabilizer 1 Stabilizer End Cap 3 Stabilizer End Cap Screw 3 M10 x 3 .” Carriage Bolt 2 .2” Washer 1 8 IRON GRIP SPORT By IMPEX FITNESS PRODUCTS LIMITED LIFE TIME WARRANTY IMPEX FITNESS PRODUCTS ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of LIFE TIME on the Frame and Weld, 3 YEARS on parts, and 6 MONTHS on upholstery from the date of purchase This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be prepaid by the customer. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an IMPEX authorized service center or for products used for heavy commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by IMPEX. IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you. The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the...