Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Note: L “#1”: Standard input tray L “#2”: Lower input tray L “#1+#2”: Standard input tray and lower input tray “CHECK PAPER” L The recording paper size setting and/or the loaded recording paper is not appropriate. – The recording paper size is not the same as the size selected for copy. – The recording paper size is not the same as the size selected when printing from the PC. – The recording paper size is not the same as the size selected for receiving a fax (KX-MB3020 only). Change the recording paper size setting (feature #380 on page 57 or feature #382 on page 57), and load the appropriate recording paper. “CHECK PICK UP INPUT TRAY #1” L Recording paper was not fed into the unit properly. Load the paper again (page 94). Note: L “#1”: Standard input tray L “#2”: Lower input tray “DIRECTORY FULL” L There is no space to store new items in navigator directory. Erase unnecessary items (page 43). “DRUM LIFE LOW REPLACE SOON” L The drum life is near to an end. Replace the drum cartridge as soon as possible. “EMAIL SIZE OVER” L When performing scan to email address, the total file size of scanned data exceeded the file size limitation. Divide the document into sections. “FAX IN MEMORY” L The unit has a document in memory. See the other displayed message instructions to print out the document. For fax memory capacity, see page 99. L If the PC fax setting (feature #442 on page 62) is set to “ALWAYS”, – check the connection between the computer and the unit. – check that the computer is turned ON. L If the fax preview mode (feature #448 on page 50) is set to “ON”, – view, print or save the received fax documents, and then erase the unnecessary documents (page 50). – turn the setting to “OFF”. The fax documents stored in memory will be printed automatically. For assistance, please visit 11. 11. Display Cause & Solution “FILE SIZE OVER” L When performing scan to FTP server, the total file size of scanned data exceeded the file size limitation. Divide the document into sections. “KEEP COPYING” L Copying has stopped due to some existing problem (Example: a lack of recording paper or a recording paper jam). See the other displayed message instructions to continue copying. “LEFT COVER OPEN” L The left cover is open. Close it. “LOW TEMP.” L The inside of the unit is extremely cold and cannot be operated. Use the unit in a warmer area. “MEMORY FULL” L When performing memory transmission, the document being stored exceeded the memory capacity of the unit. Send the entire document manually. L When making a copy, the document being stored exceeded the memory capacity of the unit. Press {Stop} to clear the message. Divide the document into sections. “MODEM ERROR” L There is something wrong with the unit’s modem. Contact our service personnel. “NO FAX REPLY” L The other party’s fax machine is busy or has run out of recording paper. Try again. “OUT OF PAPER INPUT TRAY #1” L Recording paper is not loaded or the paper input tray has run out of paper. Load paper (page 13). L Recording paper was not fed into the unit properly. Load the paper again (page 13). Note: L “#1”: Standard input tray L “#2”: Lower input tray L “#1+#2”: Standard input tray and lower input tray “PAPER JAMMED” L A recording paper jam occurred. See the other displayed message instructions to remove the jammed paper (page 89). “PC FAIL OR BUSY” L The cable or the computer power cord is not connected correctly. Check the connections (page 15, 24). L The software is not running on the computer. Restart the software and try again. “PLEASE WAIT” L The unit is warming up. Wait for a while. “REDIAL TIME OUT” L The other party’s fax machine is busy or has run out of recording paper. Try again. “REMOVE DOCUMENT” L The document is jammed. Remove the jammed document (page 95). L Attempted to send or copy a document longer than 600 mm (235/8") using the automatic document feeder. Press {Stop} to remove the document. Divide the document into two or more sheets and try again. “REPLACE DRUM CHANGE SUPPLIES” L The drum cartridge’s service life is finished. Replace the drum cartridge immediately. For assistance, please visit 11.11. Display Cause & Solution “RX MEMORY FULL” L The memory is full of received documents due to a lack of recording paper or a recording paper jam. Load paper (page 13) or remove the jammed paper (page 89). L If the PC fax setting (feature #442 on page 62) is set to “ALWAYS”, – check the connection between the computer and the unit. – check that the computer is turned ON. L If the fax preview mode (feature #448 on page 50) is set to “ON”, – view, print or save the received fax documents, and then erase the unnecessary documents (page 50). – turn the setting to “OFF”. The fax documents stored in memory will be printed automatically. “SCANNER POSITION ERROR” L There is something wrong with the scanner position. Turn the power switch OFF, then ON. If the problem cannot be solved, contact our service...
Dieses Handbuch ist für folgende Modelle:Drucker - KXMB3020 (2.67 mb)