Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kettler Dateigröße: 824.53 kb Dateiname: Unterrichtssprache:

This Limited Warranty is void if the product is damaged by accident, unreasonable use, improper service, failure to follow instructions provided, modification from its original state, or other causes determined not arising out of defects in material. This warranty gives you specific legal rights. Should this product become defective due to material within the warranty period, contact KETTLER® Parts & Service Dept. by phone at 866.804.0440, fax at 757.563.9273, or e-mail at parts@ kettlerusa.com. THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATIONS OR LIABILITY ON THE PART OF THE MANUFACTURER. KETTLER ® NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH SUCH PRODUCTS. CHECKLIST (Pedal Wrench) Allen Key(1) Screwdriver (1) R400 I-3 Screw M5*12 (8) I-2 Curved washer for ? 8*? 19*2T bolt(8) I-1 Allen Bolt M8x16mm..8.. I-4 Screw M5*10 (4) Assembly Instruction D-16 D-15 K-1 I-1 I-2 I-3 J I-1 I-2 J-3 I-4 N-6 D-13 D-14 D-13 D-14 J-5 O D-35 D-37 Step 1 1. Insert the Rear Support (N), and then attach the Rear Support with Seat Rail (M-L, M-R) by Bolt (N-5) and Flat Washers (N-4) and Carry Bar (N-3). ? M-L M-R N-4 N-5 N-3 N Step 2 1. Insert the Seat (K-1) and attach the Rolling Slider (K) by Bolt (I-1) and Flat Washers (I-2). ? K-1 I-1 I-2 K Step 3 1. Insert the Seat (K-1) onto the Seat Rail (M-L , M-R). ? Step 4 1. Fix the Pedal with Strap (J-3 & J-5) to the Pedal Support ( J ) by Screws (I-3). ? J-3 I-3 J J-5 Step 5 1. Insert the Pedal Holder (J) into the Seat Rail (M-L, M-R) by Bolt (I-1) and Flat Washers (I-2). Please note: The 4 bolts need to be loosely assembled to the Pedal Holder, ensure that the Pedal Holder is straight and then tighten down the bolts. If this is not assembled properly, the seat will not slide smoothly. ? I-1 I-2 Step 6 1. Attach the Cover (N-6) over the Rear Support by Screws (I-4). ? I-4 N-6 Step 7 1. Insert the Seat Rail (M-L, M-R), and attach the Main Frame (D) by Bolt (D-13) and Flat Washers (D-14). 2. Attach the Cover (D-15) over the Main frame (D) by Washers (D-16). 3. Connect the Cable (D-35, D-37). 4. Connect the Power Supply (O) onto the main frame to power on. ? D-16 D-15 D-13 D-14 D-13 D-14 O D-37 D-35 D-35 D-37 Explosion Drawing A-1 A B-5 B-4 B-3 B-2 B B-1 C-6 C-5 C C-1 C-2 C-7 C-8 C-9 C-3 C-4 C-10 D-1 D D-2 D-5 D-3 D-4 D-6 D-7 D-8 D-9 D-10 D-11 D-12 D-14 D-13 D-16 D-15 D-19 D-17L D-18 D-20LD-21 D-20R D-17R D-23 D-22 D-27 D-26 D-25 D-24 D-29 D-28 E E-1 E-2 E-3 E-4 E-5 E-6 E-7 F-1 F F-2 F-3 F-4 F-5 F-6 F-7 F-8 F-9 F-10 L L-1 L-2 L-3 L-4 L-5 L-6 G G-1 G-2 G-3 G-4 G-5 G-6 G-7 G-8 G-9 G-10 H H-1 H-2 H-3 H-4 H-5 H-6 H-7 H-8 H-9 H-10 H-11 H-12 H-13 H-14 H-15 H-16 H-17 H-18 H-19 H-20 I-3 I-1 I-2 J J-1 J-2 J-3 K K-2 K-3 K-1 I-1 I-2 I-4 D-13 D-14 M-L M-1 M-R M-2 M-3 N N-1 N-2 N-3 N-4 N-5 N-6 D-30 J-4 J-5 D-31 O D-32 D-33 D-34 D-35 D-36 D-37 Parts List ROWER MACHINE No. Description Quantity A COMPUTER 1 SET A-1 SCREW FOR FIXING COMPUTER 4 PCS B SUPPORTING TUBE FOR BRACKET 1 PCS B-1 BRACKET FOR FIXING COMPUTER 1 PCS B-2 SCREW 2 PCS B-3 FIXING CAP 4 PCS B-4 FLAT WASHER .6x.16x1t 2 PCS B-5 NYLON NUT M6 2 PCS B-6 HEXAGONAL NUT M6xP1.0x57L 1 PCS C BRACKET FOR ROLLER 1 SET C-1 DRIVING PULLEY 1 SET C-2 ROLLER 1 SET C-3 SCREW 1 PCS C-4 SCREW M6x50L 1 PCS C-5 NYLON NUT 3/8"x7t 1 PCS C-6 NYLON NUT M6 1 PCS C-7 SCREW M8xP1.25x35L(6m/m) 2 PCS C-8 FLAT WASHER .8*.19*2T 2 PCS C-9 BUSHING .10x.14x6mmL 2 PCS C-10 BUSHING .6x.8.5x3mmL 4 PCS C-11 FLAT WASHER .6x.16x1t 1 PCS C-12 FLAT WASHER .10x.18x1t 1 PCS D MAIN FRAME 1 SET D-1 CAP FOR FRONT STABLILZER(LEFT) 1 PCS D-2 CAP FOR FRONT STABLILZER(RIGHT) 1 PCS D-3 SUPPORTING CAP(LEFT) 1 PCS D-4 SUPPORTING CAP(RIGHT) 1 PCS D-5 ADJUSTING CAP 2 PCS D-6 HEXAGONAL SCREW 3/8"-16x3t 2 PCS D-7 TRANSPORTATION WHEEL 2 PCS D-8 C-TYPE RING .8 2 PCS D-9 SPEEDY NUT M8 2 PCS D-10 SENSOR BOX 2 SET D-11 SCREW M4x10L 2 PCS D-12 GEAR BOX 1 PCS D-13 SCREW M8*P1.25*16L(6m/m) 8 PCS D-14 FLAT WASHER .8*.19*2T 8 PCS D-15 FRONT CAP FOR SLIDER 1 PCS D-16 SCREW M5x10L 8 PCS D-17L LEFT COVER(LOWER) 1 PCS D-17R RIGHT COVER(LOWER) 1 PCS D-18 SCREW 3/16"(#10)x3/4" 2 PCS D-19 SCREW M4x50L 3 PCS D-20L SIDE COVER(LEFT) 1 PCS D-20R SIDE COVER(RIGHT) 1 PCS D-21 SCREW M4x8L 12 PCS D-22 CONNCTION PIN OF COVER 1 PCS D-23 SCREW M4x12L 10 PCS D-24 DIVERSION OF FAN 3 PCS D-25 POLE 2 PCS D-26 FIXING SOCKET OF FAN 6 PCS D-27 SCREW M3x8 12 PCS D-28 COVER OF FAN(FRONT) 1 PCS D-29 FAN COVER 1 PCS D-30 SCREW M5x8L 1 PCS D-31 DC WIRE 1 SET D-32 SCREW M5x8L 1 PCS D-33 CONNECTION BAR 1 PCS D-34 CABLE UPPER 1 PCS D-35 CONNECTION CABLE 1 PCS D-36 CABLER LOWER 1 PCS D-37 CONNECTION CABLE WITH RECEIVER 1 PCS E HANDLEBAR 1 SET E-1 PLASTIC WASHER .45x.32.2x0.5t 2 PCS E-2 BUSHING .32.2x.44.3x29L 1 PCS E-3 HEXAGON SCREW M6xP1.0x5L 2 PCS E-4 BUSHING OF FOAM .32.2x.44.3x10L 1 PCS E-5 HANDLEBAR FOAM 2 PCS E-6 CAP 2 PCS ...

Herunterladen

Geben Sie zwei Ziffern: