Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
To do this you may need to remove the Small “U” Bracket (67) from the Weight Tube (63) or remove the 3 1/2” Pulley (15) from the Long “U”-Bracket (57). Make sure that the cables are not too tight, or the Top Weight (76) will be lifted off the weight stack. Additional slack can be removed by moving the 3 1/2” Pulley (15) to the other hole in the Long “U”-Bracket (57). Remove the 3/8” Nylon Locknut (21) and the 3/8” x 2” Bolt (12) from the Cable Trap (66), Pulley, and Long “U”-Bracket. Re-attach the Pulley and Cable Trap. Be sure that the Cable trap is in the proper position and that the Cable and Pulley move smoothly. If the cables need to be replaced, see the back cover of this manual. 5766 15 2 58 21 23 2 23 12 67 76 2 1 21 CABLE DIAGRAM The diagram below shows the proper routing of the Short Cable (35), the Medium Cable (58), and the Long Cable (23). Use the diagram to be sure that the cables and the cable traps have been assembled correctly. If the cables have not been correctly routed, the home gym system will not function properly and damage may occur. The inset drawings show the proper positioning of the cable traps. The cable traps should be positioned so that the cables will not come off the pulleys. Be sure that the cable traps do not touch or bind the cables. 4 2 7 6 5 4 3 TOP VIEW 2 8—Weight Stack Long Cable (23) 1—Low Pulley Medium Cable (58) 2 1—High Pulley 5—Long “U”-Bracket Short Cable (35) 1 22 1/2" x 1/2" Bushing (87)–1 1/2" x 3/4" Spacer (61)–2 5/8" x 9/16" Spacer (73)–1 1/2" x 3/8" Spacer (91)–1 1" x 7/8" Plastic Bushing (75)–2 1" Square Inner Cap (65)–1 1 1/2" Square Inner Cap (32)–51 3/4" Square Inner Cap (44)–6 2" Square Inner Cap (27)–2 2" Square Outer Cap (51)–2 1/4" Nylon Locknut (2)–3 5/16"Nylon Locknut (3)–23 3/8" Nylon Locknut (21)–12 1/4" Flat Washer (10)–12 5/16" Flat Washer (8)–8 3/8" Flat Washer (9)–4 1/4" x 1/2" Screw (18)–6 5/16" x 3/4" Bolt (89)–1 5/16" x 1 1/4" Carriage Bolt (90)–1 1/4" x 2" Screw (24)–5 1/4" x 2" Carriage Bolt (38)–1 3/8" x 2" Bolt (12)–3 5/16" x 2 1/4" Bolt (33)–1 1/4" x 2 1/2" Screw (43)–4 5/16" x 2 1/2" Bolt (22)–4 5/16" x 2 1/2" Carriage Bolt (1)–3 3/8" x 2 1/2" Bolt (7)–3 5/16" x 2 3/4" Bolt (11)–6 5/16" x 3" Bolt (81)–2 5/16" x 1 3/4" Bolt (72)–1 5/16" x 2 3/4" Carriage Bolt (14)–3 3/8" x 3 1/2" Bolt (16)–1 3/4" Round Inner Cap (34)–4 5/16" x 5" Bolt (68)–1 3/8" x 3 3/4" Bolt (71)–4 ???@@@@@@@@e?N@h??@h???@?f?@?f?@?f?@?f?@?f?@?f??W2@@@@6X??W.M?e?I/X?.YgV/??W2@@@@6Xe?7
Kraftstationen - 831.159460 (1.08 mb)
Kraftstationen - 831.159460 (1.08 mb)
Kraftstationen - 831.159460 (1.08 mb)
Kraftstationen - 831.159460 (1.08 mb)