Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: AOC Dateigröße: 609.08 kb Dateiname: 4a10a058-5615-4883-a08e-c054da1dbc06.pdf Unterrichtssprache:

HOLD Key : Retain the current teletext page and again to cancel the function 13. SIZE Key : Switch between zooming to the upper half, lower half and in full 14. CANCEL Key : Exit from the teletext mode 15. REVEAL/CONCEAL Key : Reveal or conceal hidden text for quizzes etc PAGE 12 1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated location. 2. Connect the output terminal of RF cable to the corresponding TV input terminal. 3. Connect AV signal output (DVD or other equipments) to AV input terminal of the LCD TV with AV connecter. Ensure that every AV signal cable is connected correctly to the corresponding port. 4. Connect one side of PC, DVI terminals to the corresponding signal source terminal, and connect the other side to the corresponding LCD TV terminal. Screw down the thumbscrews on both sides to secure it. Affix the plug with care to avoid damage. 5. Connect the power cord to the AC outlet. Do ensure that other connected devices to the same power source are switched off. Caution: Please refer the power range of this product to the back label on the back cover, do not connect to any power supply, which is out of this range. When unplugging the power cord, do not touch the metal part. To Turn the TV On 1. When you turn on the power, the indicator in the front panel will blink till the TV displays pictures. 2. In Standby mode, press . .on the remote control or front panel to enter to Power On mode. To Turn the TV Off 1. Press . .on the remote control or front panel to turn the TV transitorily off. 2. Unplug the power cord from the AC outlet to turn the TV off completely. Caution: The TV will be automatically off when the power is suddenly off. The following may occur if you did not unplug the power cord from the AC outlet: a. The TV is in standby mode if it was in TV mode before b. The TV will be automatically on if it was in other modes (such as AV/PC mode) Please do not turn on/off the TV set too often! Please unplug the power cord from the AC outlet in time when the power is suddenly off! Auto Off if No Signal Input The TV will be auto off and enter into Standby mode after 15 minutes when there is no signal (For instance, no program signal transmitted from the TV Station) input or no operation of pressing buttons. Indicator Light Status Light Color Description Working mode Off The TV works normally Standby Red In Standby Mode Timer On Green Timer On is valid. Timer Off Green Timer Off is valid Power Off No Indicator The TV is turned off Sleep (PC, DVI) Yellow Sleep in PC/DVI mode INSTALLATION GENERAL OPERATION PAGE 13 1. Use the On Screen Display MENU to regulate the picture’s quality. 2. Different operating languages are available. 3. The display time for the menu ranges from 3~60 seconds. This can be adjusted in the General Setting menu. 4. Use the Panel buttons or the Remote Control to operate the OSD MENU. Using the Channel Setting Menu (For TV Use Only) 1) Press.MENU.and then use.V+./.V-. to select the Channel Setting menu in TV mode. 2) Use .P+./.P-.to select the desired field. Current Channel Press .V+./.V-.to increase/decrease the channel number. Channel Label Press.OK.to enter the edit mode. Press.P+./.P-.to select the desired letter, press.V+. /.V-.for next operation. Color System Switch among PAL, SECAM and AUTO systems. Sound System Switch among B/G, I, D/K, L and AUTO systems. Skip After Auto Search, there may be some repeated programs stored. Skipping the repeated programs can shorten the program selection. 1. Press.P+./.P-.to search for the Program skipped. 2. Input the channel number directly to resume the Program Number skipped. Auto Search In the Channel Setting Menu, press .P+./.P-. to select Auto Search and press .OK./.V+. to start Auto Searching mode. 1. During searching, the sound and color systems are automatically adjusted and programs are stored. 2. When search is finished, all 100 channels are stored, or .MENU.is pressed during the search process, the search will automatically stop and go to the channel setting menu with channel 0. Note: During searching, if channel information detected, there will be an OSD, we can Install the channel information by the hint. MENU OPERATION FUNCTION INTRODUCTION PAGE 14 Manual Search In TV mode, select Manual Search option and press .OK./.V+.to enter into Manual Search . Use .V+./.V-.to search programs within high or low frequency. After searching, the TV will automatically store receivable channels and return to the menu. Fine When the picture and sound of a channel are not satisfactory after Auto Search or Manual Search, Fine function can be used to adjust the pictures and sound. 1.In TV mode, select Fine and press.OK./.V+. to enter the Fine tuning mode. 2.Press.V+./.V-.to increase or decrease the frequency value for fine-tuning. Note: During auto search, manual search, and fine-tune operation, a password needs to be entered if any program is locked. Channel Table Two kinds of program list, Air & Cable, ca...

Herunterladen

Geben Sie zwei Ziffern: