Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Jackson Dateigröße: 1.86 mb Dateiname: Unterrichtssprache:

Using the torque wrench or a torque nutdriver (if available) 14. Apply silicone to seal the well and hold the thermostat probe in torge the nuts holding the wires, jumpers and bus bars to 16 in-lbs. place. Applying silicone to the heater well 15. Reattach the incoming power lines to the heater, ensuring that you wire the heater correctly for either single or three phase operation. Single phase wiring Tightening the nuts holding the power lines 17. Ensuring that all non-essential personnel are clear of the area, close the drain valve(s) and restore power and water to the unit. Turn the unit on and allow it to fill normally. 18. Verify that there are no leaks around the heater. If there are, attempt to tighten it down as the tub will change shape slightly as it heats up. 19. Use the amp meter to take readings off of the power lines to the heater, verifying the amperage draw to the machine data plate. 20. Wait until the heater contactor kicks out (meaning that the tub has reached the appropriate temperature) and place the unit in DELIME mode by flipping the switch on the back of the control box. Allow the unit to operate for at least ten minutes to verify that there are no leaks and that the heater is maintaining the tank temperature. 21. If the unit appears to be operating correctly, return it to AUTO mode and turn off. Heater Replacement Instructions 4 Revision A (10/14/2005) 22. Replace the heater box cover. 23. Replace the front dress panel. AFTER MAINTENANCE ACTIONS Service perosnnel may want to drain the machine and allow it to cool down. Secure power to the unit at the service breaker and then verify the torque of all fasteners covered in this instruction. SPECIAL NOTES Work performed on Jackson dishmachines by unauthorized or unqualified personnel may void the warranty. Before beginning this or any other maintenance evolution on a unit under warranty, you should contact a certified Jackson technician or Jackson Technical Service. You can find a list of qualified service agencies in the back of you unit’s installation manual. SPECIAL PARTS Heater Replacement Kit Chart Model Volts Phase KW Part Number All 208 1 15 06401-003-10-21 230 1 15 06401-003-10-22 200 3 15 06401-003-10-21 208 3 15 06401-003-10-21 220 3 15 06401-003-10-22 230 3 15 06401-003-10-22 380 3 15 06401-003-10-28 415 3 15 06401-003-10-28 440 3 15 06401-003-10-29 460 3 15 06401-003-10-31 575 3 15 06401-003-10-33 600 3 15 06401-003-10-33 208 1 10 06401-003-12-94 230 1 10 06401-003-12-95 200 3 10 06401-003-12-94 208 3 10 06401-003-12-94 230 3 10 06401-003-12-95 460 3 10 06401-003-12-96 575 3 10 06401-003-12-97 600 3 10 06401-003-12-97 CONTACT INFORMATION Jackson MSC Inc. provides technical support for all of the dishmachines detailed in this manual. We strongly recommend that you refer to this manual before making a call to our technical support staff. Please have this manual with you when you call so that our staff can refer you, if necessary, to the proper page....

Herunterladen

Geben Sie zwei Ziffern: