Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
2 Lay the TV on a at, cushioned surface. 3 Carefully align and insert the base into the stand until the locking mechanism clicks into place. Installing a wall-mount bracket 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the three screws holding the TV to its stand column, then remove the stand column. 3 Insert and lock the stando screws (provided) into into the 4 holes on the back of the TV.. 4 Secure the wall-mount bracket to the back of your TV by screwing four M4 screws provided with the bracket into the stando screws you just installed. Setting up your remote control 1 While pressing the release button on the battery compartment cover on the back of the remote, lift the cover o the remote. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries align with the + and – symbols in the battery compartment. 3 Replace the cover. To program your existing universal remote control to work with your new Dynex TV, see the table below for common codes. If you have problems programming your remote or need a dierent remote control code, visit for the latest remote control code information. Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver or game station Using HDMI (best) Connecting an antenna Connect a 75 ohm cable (not included) to RF jack on the back of your TV and the RF OUT jack on the antenna. Connecting a home theater system Using digital audio cable: Note: The DIGITAL OUTPUT jack only works with digital TV channels. Remote control sensor Power indicator Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007) Philips PHDVD5, PH5DSS, PMDVR8, PDVR8 115 DirectTV RC23 10463 RCA RCU807 135 One for All URC-6690 0464 Sony RM-VL600 8043 Comcast M1057 0463 Dish Network VIP508, VIP622 720 Motorola DRC800 0463 TIVO Series 3, HD 0091 Universal remote control makers and models Set-top box makers and models Using S-video (fair) Using component (better) Back of TV Audio Cable AUDIO IN Back of TV Back of TV Back of TV Back of TV ANT/CABLE IN ANT/CABLE IN Connecting a Computer Back of TV Locating grooves ENTER ENTER Press to move the cursor on the screen or to adjust a selected icon. Press to open the on-screen menu. Press to return to the previous menu. Press to select menu options. Press to conrm a selection or to enter a sub-menu. Press to close the menu. ME NU E X IT ENTER 15” • 19” • 22” LCD T V I QUICK SETUP GUIDE I DX-15L150A11/DX-19L150A11 /DX-22L150A11 ME NU Connecting power Connect the power cable to the AC IN jack on the back of the TV, then connect the other end to a power outlet. Turning on your TV for the rst time 1 Plug in your TV and turn it on. The initial Setup Wizard opens. 2 Press or to highlight an option and press or to change the setting. Options include: Mode-Select Manual to set date/time manually or Auto to have them set automatically...
Dieses Handbuch ist für folgende Modelle:Fernseher - DX-22L150A11 (1.62 mb)
Fernseher - DX-19L150A11 (1.62 mb)