Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
We offer this manual as a guide to increased safety and enjoyment of your new boat. The purpose of this publication is to provide easy, simple and accurate instructions on how to get your Hobie 21 SC ready for the water. Please read them carefully and familiarize yourself with the boat and all of the parts spread before you. Whether you are a new sailor or a veteran of many years, we recommend that you read this thoroughly before your first sail and TRY IT OUR WAY FIRST! If you are new to sailing, this manual alone is not intended to teach you how to sail. There are many excellent books, videos and courses on the safe handling of small sailboats. We suggest that you contact your local sailboat dealer, college or Coast Guard Auxiliary for recommendations. Watch for overhead wires whenever you are rigging, launching, sailing or trailering with the mast up. CONTACT OF THE MAST WITH POWER LINES COULD BE FATAL! Be certain that the rigging area and the area that you will be sailing in are free of overhead power lines. Report any such power lines to your local power authority and sail elsewhere. We take pride in presenting the Hobie 21 SC to you and hope that you'll take as much pride in owning her. Fair winds and good sailing! HOBIE 21 SPORT CRUISER ASSEMBLY MANUAL This assembly manual takes you stepby- step through the setting-up and sailing of your new HOBIE 21 SC. This manual will help you understand each part in detail. Setting up your Hobie 21 SC PAGE Framing the Hulls..............................2-3 Lacing the Trampoline, Main ................4 Bow Spreader ......................................5 Lacing the Trampoline, Front ...............5 Cat Cabin .............................................6 Wings ................................................6-7 Rudders................................................8 Tiller Cross Bar and Extensions ...........8 Centerboards........................................9 Drain Plugs.........................................10 Mast...............................................10-11 Preparing the Mast........................12-14 Mast Stepper.................................15-16 Boom Installation................................17 The Jib ..........................................18-19 The Main Sail ................................19-20 Downhaul and Outhaul.......................20 Hull Storage Hatches .........................21 The Tent (option)...........................21-22 Motor Mount (option)..........................22 Jennaker (option) ...............................26 Sailing your Hobie 21 SC ...........PAGE Topping LIft...............................................23 Furling the Mainsail..................................23 Righting the Cruiser .................................23 Trailering...................................................24 Comptip Maintenance..............................24 Routine Maintenance .........................24-25 Safety........................................................25 Sailing Basics......................................27-30 Safety tips ..................................Back page 1 NOTE - READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY. I. FRAMING YOUR BOAT. l.l USING THE CARDBOARD CRADLES FROM THE SHIPPING BOX, PLACE HULLS PARALLEL TO ONE ANOTHER SO THAT PHANTOM LINES 1 AND 2 ARE OF EQUAL DISTANCE. WIDTH APART = 8'6" (FIGURE 1) 1.2A INSTALL MAIN TRAMPOLINE INTO LOWER SLOT OF FORWARD CROSS BAR. (FIGURE 2) 1.3 INSTALL FRONT CROSSBAR (SEE NEXT PAGE FOR DIAGRAM) TRAMPOLINE INSTALLATION SLIDE INTO TRAMP TRACKS BEFORE MOUNTING THE XBAR TO THE HULLS. FIGURE 2 8’ 6” FIGURE 1 2 2. INSTALLING CROSS BAR BOLTS Applies to both front and rear cross bars -CAUTION- If BOLTS FEEL LIKE YOUR FORCING THEM TO THREAD, BACK THEM OUT AND CHASE TAPPED HOLES WITH A 3/8" -16 TAP. FORCING THREADING WILL DAMAGE THE BOLT AND TAPPED HOLE THREADS. APPLY ANTI SEIZE PRIOR TO INSTALLING (PREVENTS THREAD DAMAGE) FIGURE 3 (4” BOLTS INSTALL IN REAR BAR) 3/8” X 3/4” WASHERS FROM RIG KIT FRONT BAR STDB OUTBOARD APPLY RTV SEALANT AROUND HOLES PRIOR TO INSTALLATION STBD HULL - OUTBOARD 3 3. LACING YOUR TRAMPOLINE 3.1 Before lacing, slide the tramp into the tracks in both of the hulls. Be sure to slide back as far aft as possible. Using soapy water helps with the installation of the tramp. 3.2 Place tramp lace bar in tramp as shown below. (FIGURE 4) FIGURE 4 INSERT ROD IN AFT LOOP OF THE TRAMP AS SHOWN 3.3 Follow the rear X-bar lacing diagram (Figure 5) NOTE: Tighten tramp to individual preference. Do not use any tramp tightening device. This may cause damage to the tramp. LINE STARTS AT GROMMET IN TRAMP W/ A BOWLINE KNOT. FIGURE 5 4 4. BOW SPREADER INSTALLATION Install the bow spreader bar assembly with the open slot towards the aft of the boat using the four round head bolts provided. 5. FRONT TRAMPOLINE INSTALLATION Insert the forward trampoline into the upper groove of the front X-bar. The trampoline folds over the front X-bar and then inserts into the forward trampo...