Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
49), you can also release the hold by lifting its handset. Backlit LCD display The lighted handset display will stay on for a few seconds after pressing a handset button, lifting the handset off the base unit, hanging up a call, leaving the programming mode. Lighted handset keypad (KX-TC1703F/KX-TC1703G/KX-TC1703PW only) The handset dialing buttons will light when you press a button or lift the handset off the base unit, and flash when a call is received. The lights will go out a few seconds after pressing a button, lifting the handset, answering a call, hanging up a call or leaving the programming mode. Hold 00-00-08 dll] 24 Answering Calls When a call is received, the unit rings and the CALLER ID indicator on the base unit flashes quickly. If you subscribe to a Caller ID service, the * calling party information will be displayed after the first ring (p. 26). In order to view the Caller ID information, please wait until the second ring to answer a call. If the handset is off the base unit; Press K). oYou can also answer a call by pressing any dialing button (Ô) to (9), © or (#) (—Any Key Talk). OR Press (jT), and when the other party answers, talk into the microphone. Auto Talk If you set the Auto Talk feature to ON (p. 18), you can answer a call by lifting the handset off the base unit without pressing SI or When an optional headset is connected (p. 16), make sure to use the headset to talk with the caller. If you want to have a normal cordless phone conversation, disconnect the headset. 25 Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company. If you subscribe to a Caller ID service, the calling party’s information will be displayed on the handset after the first ring. The unit can record information of up to 50 different callers, including the time and date received and the number of times called, in the Caller List. The Caller List information is sorted by the most recent to the oldest call. When the 51st call is received, the first call is deleted. Using the list, you can automatically call back a caller. You can store the callers’ numbers from the Caller List into the directory. If you subscribe to a Call Waiting Caller ID Feature, when a second call is received while talking, the new caller’s name and phone number will be displayed (p. 47). How caller information is displayed when a call is received The handset display shows the caller’s name and number after the first ring. After you answer the call, the display will show the length of the call and the battery strength. ROBINSON,TINA 1-000-222-3333 The CALLER ID indicator flashes quickly when a call is being received. 26 ©Caller information cannot be displayed in the following cases: —If the caller dialed from an area which does not provide a Caller ID service, the display will show “Out of area”. —If the caller has requested not to display his/her information, the display will show “Private caller”. o|f your unit is connected to a PBX which does not support Caller ID services, you cannot access those services. oThe name display service may not be available in some areas. For further information, please contact your telephone company. To check the number of new calls When new calls have been received, the CALLER ID indicator flashes slowly on the base unit. While the handset is on the base unit: If you have received 10 new calls, the display will show the following: 10 new calls (□□□] CALLER ID Indicator While the handset is off the base unit: (The unit must be in the standby mode.) Press (3D or @ to turn the display on. If you have received 10 new calls, the display will show the following: 10 new calls VA ^Directory Using the Caller List Viewing the Caller List To check who has called, follow the steps below. Make sure the unit is in the standby mode. ILift the handset off the base unit and press Q or @ to enter the Caller List. •The display will show, for example, the following: 2 new calls ▼A ►=Directory •You can go to the directory list by pressing EDIT (►] (p. 38). To search from the most recent call, press @. To search from the oldest call, press •To scroll between callers, press or SMITH,JACK 1-222-333-4444 3 :10P JUN10 To exit the list, press [OFF). •The handset will return to the standby mode. •Once new calls have been checked, “V* will be added. • if “no items stored" is displayed in step 1, the Caller List is empty. Press or (3 to return to the standby mode, o if more than one call is received from the same caller, the date and time of the most recent call will be recorded. If the same caller calls again, the call entry with “V* will be deleted, o if you do not press any buttons for 60 seconds, the unit will return to the standby mode. 28 Ex. When you search from the most recent call: ^ Using the Caller List Calling Back from the Caller List 1 Lift the handset off the base unit and press Q or Q to enter the Caller List. Displa...