Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Fernseher - KDL-40S4010 (17.52 mb)
Fernseher - KDL-40S4010 (30.38 mb)
Anleitung Zusammenfassung
For details, refer to the instruction manual supplied with your CAM. To use the CAM, remove the “dummy” card from the CAM slot, then turn off the TV and insert your CAM card into the slot. When you are not using the CAM, we recommend that you keep the “dummy” card in the CAM slot. ~ • CAM is not supported in some countries/areas. Check with your authorised dealer. 0 AV3, and AV3 When connecting mono equipment, connect to the AV3 L AV3 socket. qa i Headphones You can listen to TV sound through headphones. 22 GB 3 Press the number buttons or PROG +/– to Viewing Pictures from Connected Equipment Turn on the connected equipment, and perform one of the following operations. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead Start playback on the connected equipment. The picture from the connected equipment appears on the screen. For an auto-tuned recorder In analogue mode, press PROG +/– or the number buttons, to select the video channel. For other connected equipment Press to display a list of connected equipment. Press F/f to select the desired input source, then press . The highlighted item is automatically selected if you do not perform any operation for two seconds after pressing F/f. If you have set an input source to “Skip” in the “AV Preset” menu (page 30), that input source does not appear in the list. z • To return to normal TV mode, press DIGITAL or ANALOG. To view two pictures simultaneously – PAP (Picture and Picture) You can view two pictures (external input and TV programme) on the screen simultaneously. Connect an optional equipment (page 21), and make sure that images from the equipment appear on the screen (page 23). ~ • This function is not available for a PC input source. • You cannot change the size of the pictures. • The analogue TV video in the TV programme picture will not appear while displaying AV1, AV2 or AV3 in the external input picture. However, you can hear the analogue video’s sound. 1 Press TOOLS. 2 Press F/f to select “PAP”, then press . The picture from the connected equipment is displayed on the left, and the TV programme is displayed on the right. select the TV channel. To return to single picture mode Press or RETURN. z • The picture framed in green is audible. You can switch the audible picture by pressing G/g. To view two pictures simultaneously – PIP (Picture in Picture) You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 21), and make sure that images from the PC appear on the screen. ~ • “Power Management” (page 29) is not available in PIP mode. 1 Press TOOLS. 2 Press F/f to select “PIP”, then press . The picture from the connected PC is displayed in full size, and the TV programme is displayed in the small screen. You can use F/f/G/g to change the position of the TV programme screen. 3 Press the number buttons or PROG +/– to select a TV channel. To return to single picture mode Press RETURN. z • You can switch the audible picture by selecting “Audio Swap” from the Tools menu. Using Optional Equipment 23 GB Using BRAVIA Sync (Control for HDMI) The control for HDMI function enables the TV to communicate with the connected equipment that is compatible with the function, using HDMI CEC (Consumer Electronics Control). For example, by connecting Sony equipment that is compatible with control for HDMI (with HDMI cables), you can control them together. Be sure to connect the equipment correctly, and make the necessary settings. Control for HDMI • Automatically turns the connected equipment off when you switch the TV to standby mode using the remote. • Automatically turns the TV on and switches the input to the connected equipment when the equipment starts to play. • If you turn on a connected audio system while the TV is on, the sound output switches from the TV speaker to the audio system. • Adjusts the volume (2 +/–) and mutes the sound (%) of a connected audio system. • You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote by pressing: – N/x/X/m/M to operate the connected equipment directly. – SYNC MENU to display the menu of the connected HDMI equipment on the screen. After displaying the menu, you can operate the menu screen by using F/f/G/g and . – TOOLS to display “Device Control”, then select options from “Menu”, “Options”, and “Content List” to operate the equipment. – Refer to the instruction manual of the equipment for available control. To connect the equipment that is compatible with control for HDMI Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, be sure to also connect the DIGITAL AUDIO (PCM) OUT (OPTICAL) socket of the TV and the audio system using an optical audio cable (except for KDL40S40xx/ 40U40xx/40L4000). For details, see page 21. To make the control for HDMI settings The control for HDMI settings must be set on both the TV side and connected equipment side. See “HDMI Set-up” on page 30 ...
Dieses Handbuch ist für folgende Modelle:Fernseher - KDL-40L4000 (4.43 mb)
Fernseher - KDL-40S4000 (4.43 mb)
Fernseher - KDL-40U4000 (4.43 mb)
Fernseher - KDL-46V4000 (4.43 mb)