Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Fotos und technische Daten Sony KDL-40S4010 |
Dieses Gerät hat auch andere Anweisungen:
Fernseher - KDL-40S4010 (17.52 mb)
Fernseher - KDL-40S4010 (30.38 mb)
Anleitung Zusammenfassung
Audio Out Variable Allows you to use the TV’s remote to control audio output from an audio system connected to the TV. Fixed The audio output of the TV is fixed. Use your audio receiver’s volume control to adjust the volume (and other audio settings) through your audio system. HDMI Set-up Allows the TV to communicate with equipment that is compatible with the control for HDMI function, and connected to the HDMI sockets of the TV. Note that communication settings must also be made on the connected equipment. 30 GB Control for HDMI Sets whether or not to link the operations of the TV and the connected equipment that is compatible with control for HDMI. When set to “On”, the following menu items can be performed. However, power consumption in standby mode is higher than usual. If the specific Sony equipment that is compatible with control for HDMI is connected, this setting is applied to the connected equipment automatically when the “Control for HDMI” is set to “On” using the TV. Auto Devices Off When this is set to “On”, the connected equipment that is compatible with control for HDMI turns off when you switch the TV to standby mode using the remote. Auto TV On When this is set to “On”, the TV turns on when you turn on the connected equipment that is compatible with control for HDMI. Device List Update Creates or updates the “HDMI Device List”. Up to 11 compatible equipment items can be connected, and up to 5 equipment items can be connected to a single socket. Be sure to update the “HDMI Device List” when you change the connections or settings. If the specific Sony equipment that is compatible with control for HDMI is connected, “Control for HDMI” is applied to the connected equipment automatically when the “Device List Update” is executed on the TV. HDMI Device List Displays a list of connected equipment that is compatible with control for HDMI. ~ • You cannot use “Control for HDMI” if the TV operations are linked to the operations of an audio system that is compatible with control for HDMI. Product Information Displays product information of the TV. All Reset Resets all settings to factory settings and displays the initial set-up screen. ~ • Do not turn off the TV or press any buttons during “All Reset” (takes about 30 seconds). • Settings for the Digital Favourites lists, country/area, language, and auto tuned channels will also be reset to factory settings. Using Menu Functions Analogue Set-up Auto Tuning Tunes in all the available analogue channels. You can retune the TV after moving house, or to search for newly launched channels. Programme Sorting Changes the order of analogue channels stored in the TV. 1 Press F/f to select the channel you want to move to a new position, then press . 2 Press F/f to select the new position for the channel, then press . (Continued) 31 GB Manual Programme Press F/f to select the programme number you want to manually tune (if tuning a Preset recorder, select channel 00), then press . System/Channel 1 Press F/f to select “System”, then press . 2 Press F/f to select one of the following TV broadcast systems, then press RETURN. B/G: For western European countries/areas I: For the United Kingdom D/K: For eastern European countries/areas L: For France 3 Press F/f to select “Channel”, then press . 4 Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g. ~ • “S” is not available when “United Kingdom” is selected for “Country” (page 7). 5 Tune the channels as follows: If you do not know the channel number (frequency) Press F/f to search for the next available channel. The search stops when a channel is found. To continue searching, press F/f. If you know the channel number (frequency) Press the number buttons to enter the channel number of the broadcast you want to tune, or the channel number of your recorder. 6 Press to jump to “Confirm”, then press . Repeat the above procedure to preset other channels manually. Label Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name appears briefly on the screen when you select the channel. AFT Allows you to fine-tune the selected channel manually if you feel that a slight tuning adjustment may improve picture quality. You can adjust the fine tuning over a range of –15 to +15. When “On” is selected, fine tuning adjustments are made automatically. Audio Filter Improves the sound of individual channels when distortion occurs in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting in mono programmes. If you do not experience any sound distortion, we recommend that you leave this option to “Off” (factory setting). ~ • You cannot receive stereo or dual sound when “Low” or “High” is selected. • “Audio Filter” is not available when “System” is set to “L”. LNA Improves the picture quality of the channel (noisy picture) when the broadcast signal is very weak. If you cannot see any improvement in the pictur...
Dieses Handbuch ist für folgende Modelle:Fernseher - KDL-40L4000 (4.52 mb)
Fernseher - KDL-40S4000 (4.52 mb)
Fernseher - KDL-40U4000 (4.52 mb)
Fernseher - KDL-46V4000 (4.52 mb)