Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Toshiba Dateigröße: 1.71 mb Dateiname: Unterrichtssprache:

3. Press CH RTN (channel return). The previous channel will display. Every time you press CH RTN, the TV will switch back and forth between the last two channels you tuned. Programming your favorite channels The Favorite Channel feature allows you to use the FAV CH Ў^ buttons on the remote control to cycle through your favorite channels, skipping over channels you do not normally watch. You can program a maximum of 12 favorite channels. Note: You can still use CHANNEL ^Ў to cycle through all the channels you previously programmed into the TV’s memory (see “Programming channels in to the TV’s memory” on page 17). To program your favorite channels: 1. Tune the TV to a channel you want to program as a favorite channel. 2. Press MENU. 3. Press x or • to highlight the SET UP menu. 4. Press y or z to highlight FAVORITE CH. MOVE [ ][ ] MORE V-CHIP CONTROL FAVORITE CH CH LABEL VIDEO LABEL TIMER: 0 MIN MORE SET UP START 5. Press x or • to display the FAVORITE CH menu. 6. Press x or • to highlight SET. 7. Press z to add the current channel to the list. 8. Press EXIT. SELECT [ ] [ ] FAVORITE CH [SET ] CLEAR 2 5 6 11 0 0 0 0 0 0 0 0 [TV: CYAN, CABLE: BLUE] SET UP SET TV CABLE VCR MENU/ ENTER CH RTN RECALL MUTE CH CH VOL VOL 1 4 7 2 5 8 3 6 9 0 ENT100 POWER oREWPAUSE FF SOURCESTILL PIP SLOW PIP CH LOCATE SWAP STOP PLAYREC TV/VCR TV/VIDEOFAV CH AEXIT CT-90037 CHANNEL NUMBERS CH RTN MENU yz x • CHANNEL yz EXIT FAV CH zy Welcome toToshiba Connectingyour TV Using theRemote Control Setting upyour TV Using the TV’sFeatures Appendix 9. Repeat steps 1–8 for up to 12 channels. (Continued on next page) 19 To select your favorite channels: Press FAV zy on the remote control to cycle through the favorite channels you programmed. To clear a favorite channel: 1. Tune the TV to the channel you want to clear from your favorite channel list. 2. Press MENU. 3. Press x or • to highlight the SET UP menu. 4. Press y or z to highlight FAVORITE CH. 5. Press x or • to display the FAVORITE CH menu. 6. Press x or • to highlight CLEAR. SELECT [ ] [ ] FAVORITE CH SET [CLEAR] 2 5 6 0 0 0 0 0 0 0 0 0 [TV: CYAN, CABLE: BLUE] SET UP CLEAR 7. Press z to clear the current channel number from the list. 8. Press EXIT. 9. Repeat steps 1–8 for other channels you want to clear from your favorite channel list. Using the V-Chip Control (blocking) feature You can use the V-Chip Control feature to block certain programs or channels, to prevent others from viewing them. Selecting a PIN code Before you can block programs or channels, you must select a personal identification number (PIN) code. Your PIN code allows you to access the V-Chip Control menu, and prevents others from changing the rating and blocking limits you set. To select your PIN code and access the V-Chip Control menu: 1. Press MENU. 2. Press x or • to highlight the SET UP menu. 3. Press y or z to highlight V-CHIP CONTROL. 4. Press x or • to display the PIN code entering screen. Note: The FAV zy buttons will not work unless you program at least one favorite channel. The FAV zy buttons function as menu x• buttons when a menu is on-screen. TV CABLE VCR MENU/ ENTER CH CH VOL VOL REWPAUSE FF SOURCESTILL PIP SLOW PIP CH LOCATE SWAP STOP PLAYREC TV/VCR TV/VIDEOFAV CH AEXIT CT-90037 MENU yz x • EXIT FAV CH zy Using the TV’sFeatures MOVE [ ][ ] MORE V-CHIP CONTROL FAVORITE CH CH LABEL VIDEO LABEL TIMER: 0 MIN MORE SET UP START SELECT [0–9] END [EXIT] BLOCKING IS RESET PLEASE ENTER NEW PIN CODE _ _ _ _ SET UP 20 5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit PIN code. After the code is entered, the V-Chip Control menu appears. 6. Press y or z to highlight ENABLE BLOCKING. MOVE [ ][ ] ENABLE BLOCKING [Y] N SET RATING SET BLOCKING OPTIONS NEW PIN CODE BLOCK CHANNEL VIDEO LOCK OFF SET UP SELECT V-Chip Control (Blocking) Menu 7. Press x or • to highlight “Y,” which enables all blocking by activating the V-Chip. See “Blocking programs by ratings” on page 22, “Blocking unrated movies and programs” on page 23, and “Blocking channels” on page 24. (Note: Highlight “N” to deactivate the V-Chip Control feature and disable blocking.) Note: The BLOCK CHANNEL and VIDEO LOCK features are independent of the ENABLE BLOCK setting. Changing your PIN code 1. Press MENU. 2. Press x or • to highlight the SET UP menu. 3. Press y or z to highlight V-CHIP CONTROL. 4. Press x or • to display the PIN code entering screen. 5. Use the Channel Number buttons (0–9) to enter your existing PIN code. After the code is entered, the V-Chip Control menu appears. 6. Press y or z to highlight NEW PIN CODE. 7. Press x or • to display the new PIN code entering screen. MOVE [ ][ ] ENABLE BLOCKING [Y] N SET RATING SET BLOCKING OPTIONS NEW PIN CODE BLOCK CHANNEL VIDEO LOCK OFF SET UP SELECT SELECT [0–9] END [EXIT] PLEASE ENTER NEW PIN CODE _ _ _ _ SET UP 8. Use the CHANNEL NUMBERS (0–9) to enter a new PIN code. After the new code is entered, the V-Chip Control menu appears. 9. Press EXIT to return to normal TV viewing. TV CABLE VCR MENU/ EN...

Herunterladen

Geben Sie zwei Ziffern: