Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
. . Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen. . . Troubleshooting If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “then click on Support. Issues Solutions and Explanations Picture Quality First of all, please perform the Picture Test and confirm that your TV is properly displaying test image. (go to MENU - Support - Self Diagnosis - Picture Test) If the test image is properly displayed, the poor picture may caused by the source or signal. Issues Solutions and Explanations The TV image does not look as good as it did in the store. . . If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality. LCD 420 does not support AV, Component mode . . Cable/Satellite subscribers: Try HD stations from the channel line up. . . Aerial connection: Try HD stations after performing Auto tuning. . . Many HD channels are up scaled from SD (Standard Definition) contents. . . Adjust the Cable/Set top box video output resolution to 1080i or 720p. . . Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal. Issues Solutions and Explanations The picture is distorted: macroblock error, small block, dots, pixelization . . Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies. . . Low signal level or bad quality can cause picture distortion. This is not a TV issue. . . Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV. Colour is wrong or missing. . . If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause colour problems or a blank screen. LCD 420 does not support AV, Component mode Issues Solutions and Explanations There is poor colour or brightness. . . Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness) . . Adjust Energy Saving option in the TV menu. (go to MENU - System - Eco Solution - Energy Saving) . . Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture) There is a dotted line on the edge of the screen. . . If the picture size is set to Screen Fit, change it to 16:9. . . Change cable/satellite box resolution. The picture is black and white. . . If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV. LCD 420 does not support AV, Component mode Issues Solutions and Explanations When changing channels, the picture freezes or is distorted or delayed. . . If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box rebo...
Dieses Handbuch ist für folgende Modelle:Fernseher - LA32E420E2W (2.08 mb)
Fernseher - UA22ES5000W (2.08 mb)
Fernseher - UA26EH4000W (2.08 mb)
Fernseher - UA32EH4000W (2.08 mb)