Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
0 . 0 . 0 DNS Mode Manual DNS Server 0 . 0 . 0 . 0 5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network connection screen appears, and network setting is done. The check list for wired network connection failure When wired network connection failed, try to apply the following information to each issue. Issues Solutions and Explanations No network cable found. • Check that your network cable is plugged in. • If it is connected, make sure that the router is turned on; if it is on, try turning it off and on again. IP auto setting failed. Try the following to set your IP address automatically or set your IP address manually by selecting IP Settings. • Ensure DHCP server is enabled on router and unplug and re-plug-in the router. • Contact your Internet Service Provider for more information. Issues Solutions and Explanations Unable to connect to the network. • Check if your IP address is set correctly in IP Settings. • Contact your Internet Service Provider for more information. Connected to your local network, but cannot connect to the Internet. • Check your Internet LAN cable is connected correctly to LAN port of router. • Check the DNS settings in IP Settings. • If the problem persists, contact your Internet Service Provider to access the Internet. Network setup complete, but cannot connect to the Internet. • Confirm that your router is connected to the Internet. • If the problem persists, contact your Internet Service Provider to access the Internet. . . Setting the Wireless Network for LED 5 series 32" and above, PDP 490 series N N For LED TVs, network function is not supported depending on the country. ¦ ¦ Wireless Network Setup (Auto) Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up wireless security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process. N N When connecting Samsung Wireless LAN Adapter, the screen pop-up appears directly to set wireless network. How to set up automatically 1. Go to Network Settings screen. 2. Select Start. 3. The Network function searches for available wireless networks. When done, it displays a list of the available networks. Network Settings Samsung Wireless LAN Adapter connected. Press Start to configure your wireless network settings. If you want to connect to your wired network, plug in a network cable. Start Cancel 4. In the list of networks, press the ^ or Ў button to select a network, and then press ENTERE button. N N ...
Dieses Handbuch ist für folgende Modelle:Fernseher - LA32E420E2W (2.08 mb)
Fernseher - UA22ES5000W (2.08 mb)
Fernseher - UA26EH4000W (2.08 mb)
Fernseher - UA32EH4000W (2.08 mb)