Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness. Reset: Resets the White Balance to its default settings. . . Gamma: Adjust the primary colour intensity. . . Motion Lighting (Off / On): Reduce power consumption by brightness control adapted motion. N N This function is not supported in 3D mode. for PDP 490 series N N Only available in Standard mode. N N When changing a setting value of Backlight for LED, LCD TV / Cell Light for PDP TV , Brightness or Contrast, Motion Lighting will be set to Off. ¦ ¦ Picture Options O O MENUm > Picture > Picture Options > ENTERE N N When connecting a PC, you can only make changes to the Colour Tone. . . Colour Tone (Cool / Standard / Warm1 / Warm2) N N Warm1 or Warm2 will be deactivated when the picture mode is Dynamic. N N Settings can be adjusted and stored for each external device connected to an input on the TV. . . Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. N N When the signal is weak, try other options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays signal strength. N N Only available for analogue channels. N N When the INFO button is pressed, the signal strength bar is displayed. N N When bar is green, you are receiving the best possible signal. . . MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality. . . HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth. N N Available only in HDMI mode (RGB signals). . . Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality. N N Available in TV mode, AV, Component (480i / 1080i) and HDMI (1080i). LCD 420 does not support AV, Component mode N N If the screen does not seem natural, change its option to Off / Auto1 / Auto2 in Film Mode. . . LED Motion Plus (Off / On) for LED 5 series : Removes drag from fast scenes with a lot of movement to provide a clear picture. N N It will be deactivated when the picture mode is set to Natural. ¦ ¦ Reset Picture (Yes / No) O O MENUm > Picture > Reset Picture > ENTERE Resets your current picture mode to its default settings. . . Changing the Preset Sound Mode ¦ ¦ Sound Mode t O O MENUm > Sound > Sound Mode > ENTERE . . Standard: Selects the normal sound mode. . . Music: Emphasizes music over voices. . . Movie: Provides the best sound for movies. . . Clear Voice: Emphasizes voices over other sounds. . . Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. N N If Speaker Select is set to External Speaker, Sound Mode is disabled. for LED, PDP TV . . Adjusting Sound Settings ¦ ¦ Sound Effect (standa...
Dieses Handbuch ist für folgende Modelle:Fernseher - LA32E420E2W (2.08 mb)
Fernseher - UA22ES5000W (2.08 mb)
Fernseher - UA26EH4000W (2.08 mb)
Fernseher - UA32EH4000W (2.08 mb)