Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. Helpful Hint ( / NORMALIZE Normalization) PRESENT TIME SETUP / SET UP TIMER The timer can switch the Plasma Display ON or OFF. Before attempting Timer Set, confirm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME / POWER OFF TIME. 1 2 2 Press to display the SET UP menu. Press to select SET UP TIMER or PRESENT TIME SETUP. 2/2SET UP SET UP TIMER PRESENT TIME SETUP Press to display the SET UP TIMER screen or PRESENT TIME SETUP screen. PRESENT TIME SETUP 1 1 Press to select DAY or PRESENT TIME OF DAY. Press to set up DAY or PRESENT TIME OF DAY. button: Forward button: Back Notes: 99:99PRESENT TIME OF DAY MON PRESENT TIME SETUP PRESENT TIME OF DAY MON 99:99 SET DAY • Pressing “ ” or “ ” button once changes PRESENT TIME OF DAY 1 minute. 2 2 • Pressing “ ” or “ ” button continuously changes PRESENT TIME OF DAY by 15 minutes. Press to select SET. Press to store PRESENT TIME SETUP. Notes: • SET cannot be selected unless PRESENT TIME OF DAY is set. • Unless setting the present time other than “99:99”, DAY setting is invalid. • The settings of “DAY” and “PRESENT TIME OF DAY” are reset when leaving the display turned off for about 7 days for the following reasons: Pressing POWER switch of the unit to turn off the display. Disconnecting the AC cord. Interruption of power supply. SET UP TIMER Press to select POWER ON TIME / POWER OFF TIME. Press to set up POWER ON TIME / POWER OFF TIME. button: Forward button: Back Notes: • Pressing “ ” or “ ” button once changes POWER ON TIME / POWER OFF TIME 1 minute. 0:00 0:00 SET UP TIMER POWER OFF FUNCTION POWER ON FUNCTION OFF OFF POWER OFF TIME POWER ON TIME PRESENT TIME OF DAY 99:99 • Pressing “ ” or “ ” button continuously changes POWER ON TIME / POWER OFF TIME by 15 minutes. Press to select POWER ON FUNCTION / POWER OFF FUNCTION. Press to select ON. Note: Timer function will not work unless “PRESENT TIME OF DAY” is set. 2 SCREENSAVER (For preventing image retention) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSAVER should be used. 1 2 2 Press to display the SET UP menu. Press to select the SCREENSAVER. Press to select the SCREENSAVER screen. FUNCTION selection 3 Press to select the FUNCTION. Press to select the desired function. NEGATIVE IMAGE SCROLLING BAR ONLY WHITE SCREEN OVERLAY SCROLLING BAR NEGATIVE IMAGE : A negative image will be displayed on the screen. SCROLLING BAR ONLY : A white bar will scroll from left to right. The image won't be displayed. OVERLAY SCROLLING BAR : The brightness of the image will be decreased and a white bar will scroll on it. WHITE SCREEN : The whole screen will be white. Note: OVERLAY SCROLLING BAR is not effective during two screen display. MODE selection 4 1/2 SIGNAL SCREENSAVER PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SAVE SET UP SCREENSAVER START FUNCTION WOBBLING PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY 6:15 12:30 OFF OFF SIDE BAR ADJUST BRIGHT PRESENT TIME OF DAY 99:99 MODE OFF START setting 5 Off Press to select the MODE. Press to select each INTERVAL : Operates when SHOW DURATION and SAVER mode items. DURATION are set up and those times arrive. TIME OF DAY : Operates when START TIME and FINISH TIME are set up and those times arrive. ON : Operates when START is selected and the ACTION ( ) button is pressed. When the MODE is set to ON, press to select START. Press to start SCREENSAVER. The menu screen will disappear and the SCREENSAVER will be activated. To stop the SCREENSAVER under ON, press the R button or any buttons on the main unit. Note: When the display is turned off, the SCREENSAVER will be deactivated. Setup of SCREENSAVER Time After selecting TIME OF DAY or INTERVAL, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.) Press to select START TIME / FINISH TIME (When TIME OF DAY is selected). SCREENSAVER PRESENT TIME OF DAY 15:00 START Press to select SHOW DURATION / SAVER DURATION (When FUNCTION SCROLLING BAR ONLY TIME OF DAY INTERVAL is selected). MODE START TIME 6:15 Press to setup. FINISH TIME 12:30 button: Forward button: Back Notes: SCREENSAVER PRESENT TIME OF DAY 15:00 START • Pressing “ ” or “ ” button once changes the Time 1 minute. FUNCTION SCROLLING BAR ONLY [However, switching occurs every 15 minutes when Periodic Time is selected.] MODE INTERVAL SHOW DURATION 12:00 • Pressing “ ” or “ ” button continuously changes the Time by 15 minutes. SAVER DURATION 3:00 Note: Timer function will not work unless “PRESENT TIME OF DAY” is set. SCREENSAVER (For preventing image retention) Reduces screen image retention ...
Dieses Handbuch ist für folgende Modelle:Fernseher - TH-37PR11UH (3.76 mb)
Fernseher - TH-42PR11UK (3.76 mb)
Fernseher - TH-42PR11UH (3.76 mb)