Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
Press to select OFF, DARK, MID, BRIGHT. Press to exit from SCREENSAVER. 2 OFF MID BRIGHTDARK Notes: • To reduce the occurrence of image retention, set the SIDE BAR ADJUST to BRIGHT. • The side bar may flash (alternate black/white) depending on the picture being shown on the screen. Using Cinema mode will reduce such flashing. Reduces power consumption • POWER SAVE: When this function is turned ON, luminous level of the Plasma Display is suppressed, so power consumption is reduced. • STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced during power supply standby (see page 12, 14, 15), so standby power of the set is reduced. • POWER MANAGEMENT: When this function is set to ON, it operates under the following conditions to turn the power on or off automatically. When no pictures (sync signals) are detected for 30 or so seconds during PC IN signal input: >Power is turned off (standby); the power indicator lights up orange. The power is not turned off when the SYNC ON G sync signal has been detected. When pictures (sync signals) are subsequently detected: >Power is turned on; the power indicator lights up green. The power is not turned on when only the SYNC ON G sync signal has been detected. Notes: • This function operates only during PC IN signal input. • This function is invalid during input from PC Input Terminal Board (TY-42TM6P). • This function is effective when “SYNC” is set to “AUTO”, “COMPONENT / RGB-IN SELECT” is set to “RGB” and during normal viewing (one picture screen). • AUTO POWER OFF: Equipment power supply is turned OFF when there is no signal. When this is set to On, the power supply of the unit goes Off 10 minutes after the input signals stop. Notes: • This function operates only during PC IN signal input. • This function is effective when “SYNC” is set to “AUTO”, “COMPONENT / RGB-IN SELECT” is set to “RGB” and during normal viewing (one picture screen). 1 1 Press to select “POWER SAVE” “STANDBY SAVE” “POWER MANAGEMENT” “AUTO POWER OFF”. 2 2 Press to select “ON” or “OFF”. On Off 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP Press to exit from SET UP. Customizing the Input labels This function can change the label of the Input signal to be displayed. Select the input signal which you would like to change its label before customizing the Input labels. (see page 13, 15) Press to select INPUT LABEL. Press to change the INPUT LABEL. Note: 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP While selecting a Input signal through Optional Terminal Board connected to Slot 1, Slot 2 and Slot 3, the Input label will depend on each Optional Terminal Board. INPUT LABELS for Slot 1, Slot 2, Slot 3 and Mini D-sub: [Slot1 Input] INPUT1/VIDEO1/COMPONENT1/RGB1/DIGITAL1/PC1/DVD1/CATV1/VCR1/STB1 [Slot2 Input] INPUT2/VIDEO2/COMPONENT2/RGB2/DIGITAL2/PC2/DVD2/CATV2/VCR2/STB2 [Slot3 Input] INPUT3/VIDEO3/COMPONENT3/RGB3/PC3/DVD3/CATV3/VCR3/STB3 [PC (Mini D-sub) input] PC/COMPONENT/RGB/DVD/STB When BNC Dual Video Terminal Board (TY-FB9BD) is used, an “A” or “B” is added at the end of each input label, depending on the input selected (see below). Addition sign “A” “B” Selected Input Composite S VIDEO SET UP for Input Signals COMPONENT / RGB IN SELECT Select to match the signals from the source connected to the COMPONENT / RGB input terminals. Y, PB, PR signals “COMPONENT” RGB signals “RGB” 1 2 2 Press to display the SET UP menu. Press to select the “COMPONENT / RGB-IN SELECT”. Press to select the desired mode. COMPONENT RGB 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP Press to exit from adjust mode. Notes: • Selection may not be possible, depending on which optional board is installed. • Make setting of the selected input terminal (SLOT1, SLOT2, SLOT3 or PC IN). YUV / RGB IN SELECT Select to match the signals from the source connected to the DVI input terminals. YUV signals “YUV” RGB signals “RGB” 1 Press to display the SET UP menu. 2 2 Press to select the “YUV / RGB-IN SELECT”. Press to select the desired mode. YUV RGB 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) YUV/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP Press to exit from adjust mode. Notes: • Selection may not be possible, depending on which optional board is installed. • Make setting of the selected input terminal (SLOT1 or SLOT2). SET UP for Input Signals SIGNAL menu Note: “SIGNAL” setup menu displays a different setting condition for each input signal. 1 2 2 Press to display the SET UP menu. Press to select the “SIGNAL”. For VIDEO (S VIDEO) For RGB 3 3 Press to display the SIGNA...
Dieses Handbuch ist für folgende Modelle:Fernseher - TH-37PR11UK (3.76 mb)
Fernseher - TH-42PR11UK (3.76 mb)
Fernseher - TH-42PR11UH (3.76 mb)