Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Cable .You need to subscribe to a cable TV service to enjoy viewing their programming. .You may need to subscribe to a high-definition (HD) cable service to enjoy HD programming. The connection for high-definition can be done with the use of an HDMI or Component Video cable. (p. 12) Note .When using a Cable box, external equipment and video cables shown in this manual are not supplied with the TV. .When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. .For additional assistance, visit us at: AV cable connection AV cable connection To use HDMI terminals Best L R HDMI AV OUT HDMI-DVI Conversion cable DVI OUT AUDIO OUT AV Equipment e.g. Blu-ray Discplayer AV Equipment Connect to Audio e.g. Blu-ray Disc input terminal player To use COMPONENT terminals L R Y PB PR AUDIO OUT COMPONENT VIDEO OUT whitewhite red green blue green blue green red red white red red red blue AV Equipment e.g. Blu-ray Discplayer To use COMPOSITE terminals red .The Green terminal is shared for both the COMPONENT and COMPOSITE (VIDEO IN) connection. When using COMPOSITE (VIDEO IN) connection, the Yellow connector (Video) should be inserted into Green connection. select Comp.Video Good Basic (Not HD) L R COMPOSITE OUT yellow white yellow white red yellow white red or e.g. DVD Recorder AV Equipment e.g. VCR (For more details, please refer to eHELP (p. 16). ) Audio connection DIGITAL AUDIO IN Audio equipment Optical cable e.g. Amplifier Identifying Controls TV controls/indicators Front of the TV Back of the TV Changes the input mode Chooses Menu and Submenu entries (Press and hold down for MENU function) Volume up/down Selects channels in sequence C.A.T.S. sensor Plasma C.A.T.S. (Contrast Automatic Tracking System) POWER button Power indicator (on: red, off: no light) Remote control sensor • An image of the control panel is displayed on the screen while using it. within about 23 feet (7 meters) in front of the TV set Note .The TV consumes a small amount of electric energy even when turned off. .Do not place any objects between the TV remote control sensor and remote control. Remote control Switches TV On or Off (Standby) Select source to watch Displays Main Menu Displays Options Menu for special functions (when available) Colored buttons (used for various functions) Volume up/down Sound mute On/Off Changes aspect ratio and zoom Switches to previously viewed channel or input External equipment operations Closed Caption On/Off Selects Secondary Audio Programming Exits from menu screen Displays 3D settings (p. 15) Displays VIERA Connect Home screen Displays VIERA TOOLS menu Selects/OK/Change Go back to previous menu Channel up/down, when viewing from ANT/Cable source Displays or removes the information banner Operates the Favorite channel list function Numeric keypad to select any channel or press to enter alphanumeric input in menus Use for digital channels. First Time Setup The first time setup screen is displayed only when the TV is turned on for the first time, after the power cord is inserted into a wall outlet and the “Auto power on” is set to “No”. (Press MENU --> Setup --> Advanced setup --> Auto power on) Turn the TV on with the POWER button (TV) (Remote) or Setup the following items .Select your language .Select your country .Select your viewing mode (Be sure to select “ Home Use”) If you select “ Store Demonstration” by mistake, confirmation screen will be displayed. To display the “Set viewing mode” screen again and select “Home Use”, do one of the following: • Press and hold down the side POWER button for at least five seconds. • Unplug power cord for 30 seconds and plug in again. .ANT/Cable setup Select and set the settings according to your ANT/Cable environment. Select “Yes” on the confirmation screen, to start the scanning process. After scanning is finished completely, press OK to continue. .Label the inputs for easy identification To name each input, follow the instructions on screen. When this is done, select NEXT and press OK to go to the next step. .Configure Network settings Select the Network type and select the setting mode. If you select “Wireless (WiFi)”, start “Wireless network settings”. Select “Automatic” or set “Manual” setting, start connection test. When you complete “Network settings” successfully, the completion screen will be displayed. .Adjust the Clock Select the clock mode and set other settings. When “Auto” is selected, clock will be set automatically according to Time zone and DST. Complete First time setup Completion screen is displayed. You can repeat the First time setup • Press MENU --> Setup --> First time setup or To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR, gaming device, etc.), press the INPUT button and select the appropriate input. Viewing 3D images on TV Precautions for Viewing 3D Images Cautions During Viewing Do not use devices that emit strong electromagneti...
Dieses Handbuch ist für folgende Modelle:Fernseher - TC-P42UT50 (2.24 mb)
Fernseher - TC-P50UT50 (2.24 mb)
Fernseher - TC-P55UT50 (2.24 mb)