Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
¦About wireless LAN adapter (Optional Accessory) .Wireless LAN adapter and Access point need to be obtained separately. For the latest information on applicable wireless LAN adapters, check the following website: .Check that the Access point supports WPS*. (If it does not support WPS, “Password” of the Access point is required when configuring settings.) .Follow the instructions on the Access point setup screen and configure the appropriate security settings. For more details on setting of Access point, please refer to operating manual for the Access point. .We recommend using 11n (5 GHz) for the wireless system between the wireless LAN adapter and Access point. Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the communication speed may be slower. .If the wireless system of the Access point is changed, devices that could connect by wireless LAN may no longer be able to connect. .When Online Movies, DLNA, or other device is using the network, do not disconnect the wireless LAN adapter. .Data transmitted and received over radio waves may be intercepted and monitored. .Keep the TV away from the following devices as much as possible: Wireless LAN, microwaves, and other devices that use 2.4 GHz and 5 GHz signals. Otherwise, the TV failures such as malfunction may occur due to the radio wave interference. .When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In this case, turn the TV Off with power On / Off switch, then turn it On again. * WPS: Wi-Fi Protected Setup Accessories/Optional Accessories Accessories Check you have all the items shown. Accessories Remote Control Transmitter N2QAYB000704 Batteries for the Remote Control Transmitter (2) AA Battery Power cord Quick start guide Owner’s Manual Product Registration Card (U.S.A.) Child safety Pedestal How to assemble (p. 9) Optional Accessories Please contact your nearest Panasonic dealer to purchase the recommendedOptional accessories. For additional details, please refer to the Optionalaccessories installation manual. 3D Eyewear(Rechargeable type).TY-ER3D4SU .TY-ER3D4MU • Use Panasonic 3D Eyewear supporting Bluetooth wireless technology. • Product information (Model No. and release date etc.) is subject to change without notice. • For more product information(USA) (Canada) reference) Wireless Adapter.TY-WL20U Communication Camera .TY-CC20W • This camera can be used with VIERA Connect. • It is recommended to connect the communication camera directly to the TV’s USB2 ports. • For details, read the manual for the Communication Camera. Wall-hanging bracket .TY-WK4P1RW (for 42”/50”) .TY-WK5P1RW (for 55”/60”) (for 42”/55”) The angle of wall-hangingbracket can be adjusted in“zero tilting (vertical)” and“5, 10, 15 or 20-degree tilting” for this TV. (for 50”) The angle of wall-hangingbracket can be adjusted in“zero tilting (vertical)” and“5 or 10-degree tilting” forthis TV. (for 60”) The angle of wall-hangingbracket can be adjusted in“zero tilting (vertical)” and“5, 10 or 15-degree tilting” for this TV. Rear of the TV Holes for wall-hanging bracket installation Screw for attaching the TV to the wall- hanging bracket (not supplied with the TV) Depth of screw: minimum 0.67” (17.0 mm) maximum 1.38” (35.0 mm) (42”/50”), 1.46” (37.0 mm) (55”/60”) (View from the side) a b M8 a: 15.7” (400 mm) (42”/50”) 19.7” (500 mm) (55”/60”) b: 11.8” (300 mm) Warning .In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets..Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to preventthe TV from tipping over. .Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage. .Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket..When using the angled-type wall-hanging bracket, please ensure that there is sufficient space for the connecting cables not to press against the wall when the TV is tilted forward. .For safety reasons, remove units no longer being used from their wall-mounted locations. Ferrite core (For TC-P42UT50/TC-P50UT50 only) for HDMI cable (2) for USB cable (2) 9 Accessories Assembly screws XYN4+F10FNK (Black) size (M4 x 10) (for 42”/ 50” (5), for 55”/60” (1)) XYN5+F16FN (silver) size (M5 x 16) (for 42”/ 50” (7), for 55”/60” (12)) Bracket (1) TBL5ZA3238 (for 42”/50”) TBL5ZA3200 (for 55”/60”) Neck (1) TXFBL5Z0069 (for 42”/50”) TXFBL5Z0085 (for 55”/60”) Cover (1) TXFBL5Z0071 (for 42”/50”) TXFBL5Z0056 (for 55”/60”) Cover is in the same bag with Owner’s Manual Base (1) TBL5ZX0292 (for 42”) TBL5ZX0294 (for 50”) TBL5ZX0420 (for 55”) TBL5ZX0421 (for 60”) Attaching the pedestal to TV ¦Assembling...
Dieses Handbuch ist für folgende Modelle:Fernseher - TC-P50UT50 (2.24 mb)
Fernseher - TC-P55UT50 (2.24 mb)
Fernseher - TC-P60UT50 (2.24 mb)