Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
Press VOL (-) button to DELETE a channel from memory. Press the STATUS button to clear the screen after adding (or deleting) all the channels you want. CABLE CHANNEL To SAVE a channel above 100, use the CH st buttons on the TV. The remote number buttons only go up to channel 99. SMART HELP 4 - IB7759 E001 ONVOL. BAR EXIT SETUP BRIGHTNESS PICTURE COLOR OFF VOLUME STATUS/EXIT CH CH POWER VOL VOL MENU A/CH MUTE CC SLEEP 1 2 34 5 67 8 90 1 2 3 ON-SCREEN MENU CONTROLS (CONTINUED) Use the Volume Bar con- trol to see the TV’s vol- ume level settings on the TV screen. Once set the Volume Bar will be seen each time the VOLUME buttons (on the TV or remote) are pressed. VOLUME BAR Press the MENU (M) button on the remote, then press the CH (+) or (–) (or press the MENU s or t but- tons on the TV) to select the word VOL. BAR with the TV’s on-screen Arrow. Press the VOL (+) or (-) buttons to turn the VOL BAR control ON or OFF. Try it out. Press the VOL (+) or (–) buttons. The VOLUME BAR should appear at the bottom of the screen. NOTE: The TV's volume level can also be lowered when the set is turned OFF. SMART HELPPress STATUS button to clear the screen. VOLUME BEGIN You can limit the maximum volume level of the TV set. Once the Volume Limiter control is set the TV sound cannot be played louder than the maximum preset level. LIMITING THE VOLUME Press numbers 0, 7, 2, 0, 9, 1; then press MENU (M) button on the remote or TV. The VOL. LIMIT bar will show on the screen. Press the or (–) button LIMIT bar is at the level you want to be the highest possible volume. return to the low end of the register (when the STATUS button is pressed to set the desired maximum volume level - step # 3). This is normal for setting the Volume Limiter. Your new maximum volume level has been kept in memory. BEGIN CC SLEEP 90 2 Your TV can receive broadcast stereo TV pro- grams. The TV has both an amplifier and twin speakers through which the stereo sound can be heard. Press the MENU (M) button on the remote, then the CHANNEL s or t buttons (or the MENU s or t buttons on the TV) to select the word STEREO with the TV’s on- screen Arrow. Press the VOLUME (+) or (–) buttons to turn the STEREO mode ON or off. set to STEREO but the current channel is not broadcasted in stereo, the sound will remain monaural. SMART HELPPress the STATUS but- ton on the remote control to clear the screen. NOTE: The TV’s on-screen “STEREO” indicator appears whenever the TV detects an incoming stereo signal. Be sure the TV’s STEREO control is also turned “ON” in order for the stereo sound to be heard through the TV’s twin speaker system. NOTE: Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require you contacting your dealer or requesting service. ON-SCREEN MENU CONTROLS (CONTINUED) Use the Volume Bar con- trol to see the TV’s vol- ume level settings on the TV screen. Once set the Volume Bar will be seen each time the VOLUME buttons (on the TV or remote) are pressed. VOLUME BAR Press the MENU (M) button on the remote, then press the CH (+) or (–) (or press the MENU s or t but- tons on the TV) to select the word VOL. BAR with the TV’s on-screen Arrow. Press the VOL (+) or (-) buttons to turn the VOL BAR control ON or OFF. Try it out. Press the VOL (+) or (–) buttons. The VOLUME BAR should appear at the bottom of the screen. NOTE: The TV's volume level can also be lowered when the set is turned OFF. SMART HELPPress STATUS button to clear the screen. VOLUME BEGIN You can limit the maximum volume level of the TV set. Once the Volume Limiter control is set the TV sound cannot be played louder than the maximum preset level. LIMITING THE VOLUME Press numbers 0, 7, 2, 0, 9, 1; then press MENU (M) button on the remote or TV. The VOL. LIMIT bar will show on the screen. Press the or (–) button LIMIT bar is at the level you want to be the highest possible volume. return to the low end of the register (when the STATUS button is pressed to set the desired maximum volume level - step # 3). This is normal for setting the Volume Limiter. Your new maximum volume level has been kept in memory. BEGIN CC SLEEP 90 2 Your TV can receive broadcast stereo TV pro- grams. The TV has both an amplifier and twin speakers through which the stereo sound can be heard. Press the MENU (M) button on the remote, then the CHANNEL s or t buttons (or the MENU s or t buttons on the TV) to select the word STEREO with the TV’s on- screen Arrow. Press the VOLUME (+) or (–) buttons to turn the STEREO mode ON or off. set to STEREO but the current channel is not broadcasted in stereo, the sound will remain monaural. SMART HELPPress the STATUS but- ton on the remote control to clear the screen. NOTE: The TV’s on-screen “STEREO” indicator appears whenever the TV detects an incoming stereo signal. Be sure the TV’s STEREO control is also turned “ON” in order for the stereo sound to be heard through the TV’s twin speaker system. ...