Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The values of fine, coarse and position are adjusted automatically. Auto Adjustment in progress Please wait. Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the ▲ or ▼ button to select “Auto Adjustment”, then press the ENTER® button. ♦ Screen Adjustment: Coarse/Fine The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the center of screen. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER® button. Press the ◄ or ► button to adjust the screen quality. Press the ENTER® button. ♦ Position Adjust the PC's screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position. Press the ENTER® button. Image Reset You can replace all image settings with the factory default values. Tools Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off PIP I Auto Adjustment ^ Move EH Enter -HP Exit TV *-1 m 50 93 w : Position > % Image Reset > ji-p ^ Move B1 Enter Ï) Return TV p 1 Position > 1 4l, 1 Image Reset >| # ¿s» ^ Move B1 Enter 5 Return English - 47 Using the WISELINK Function This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class (MSC) device. Press the POWER button on the remote control or your set. Connect a USB device containing JPEG and/or MP3 files to the WISELINK jack (USB jack) on the side of the TV. If you enter the WISELINK mode with no USB device connected the message “There is no device connected” will appear. In this case, insert the USB device, exit the screen by pressing the W.LINK button on the remote control and enter the WISELINK screen again. Only alphanumeric characters must be used as a folder name or filename (photo, music). The file system only supports FAT16/32 (The NTFS file system is not supported) Certain types of USB Digital camera and audio devices may not be compatible with this TV. Wiselink only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.) Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.SAMSUNG is not responsible for any data file damage or data loss. Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB Compatibility problem. Only MP3 and JPEG file formats are supported. The Wiselink mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz, or 48 kHz). We recommend the sequential jpeg format. Progressive jpeg uses a lot of memory and decoding may fail. Do not disconnect the USB device while it is loading. MTP (Media Transfer Protocol) is not supported. The playing duration of an mp3 file may be displayed as ‘00:00:00' if its playing time information is not found at the start of the file. The higher the resolution of the image, the longer it takes to display on the screen. The Photo or Music List displays up to 300 folders or files. Loading may take some time depending on the size of the file. English - 48 Using the WISELINK Menu 1. Press the MENU button. Press the ▲ or ▼ button to select “Input”, then press the ENTER® button. 2. Press the ▲ or ▼ button to select “WISELINK”, then press the ENTER® button. Press the ▲ or ▼ button to select the corresponding USB Memory Device, then press the ENTER® button. ^ The "WISELINK" menu differs depending on the USB Memory Device connected to TV. ^ Some devices may not be supported due to compatibility problems. Press the ◄ or ► button to move to an icon, then press the ENTER® button. ^ To exit WISELINK mode, press the W.LINK button on the remote control. [51 Press the W.LINK button on the remote control to display a WISELINK menu. Using the Remote Control Button in WISELINK Menu i±> (guide) (menu) @ TCXXSp RETURNl^ M Button Operations ▲/ ▼/ ◄/ ► Move the cursor and select an item. ENTER® Select the currently selected item. CZD Play the Slide Show or MP3 file. CD Pause the Slide Show or MP3 file. RETURN Return to the previous menu. INFO Run various functions from the Photo and Music menus. CZD Stop the current slide show or MP3 file. GD
Fernseher - LE32A556 (21.96 mb)
Fernseher - LE32A557 (21.96 mb)
Fernseher - LE32A558 (21.96 mb)
Fernseher - LE32A559 (21.96 mb)