Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Samsung Dateigröße: 21.96 mb Dateiname: Unterrichtssprache:

Otherwise, just click "OK" and exit the dialog box. Display Modes_ Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. ^ D-Sub Input Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) IBM 640 x 350 720 x 400 31.469 31.469 70.086 70.087 52 72 T- CO LO CO 22 + / -- / + 640 x 480 31.469 59.940 25.175 - 640 x 480 37.861 72.809 31.500 / - 640 x 480 37.500 75.000 31.500 / - 800 x 600 37.879 60.317 40.000 + 800 x 600 48.077 72.188 50.000 + 800 x 600 46.875 75.000 49.500 + VESA 1024x768 48.363 60.004 65.000 / - 1024x768 56.476 70.069 75.000 / - 1024x768 60.023 75.029 78.750 + 1280x1024 63.981 60.020 108.000 + 1280x1024 79.976 75.025 135.000 + 1360x768 47.712 60.015 85.500 + 1600x1200 75.000 60.000 162.000 + CVT 1920 x 1080RB 66.587 59.934 138.500 + / - ^ HDMI/DVI Input Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) 640 x 480 31.469 59.940 25.175 - / - 800 x 600 37.879 60.317 40.000 + / + VESA 1024x768 48.363 60.004 65.000 - / - 1280x1024 63.981 60.020 108.000 + / + 1360x768 47.712 60.015 85.500 + / + 1600x1200 75.000 60.000 162.000 + / + CEA 1920x1080p 67.500 60.000 148.500 + / + ^ When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack. ^ The interlace mode is not supported. ^ The set might operate abnormally if a non-standard video format is selected. ^ Separate and Composite modes are supported. SOG is not supported. ^ Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080 or 1600x1200). English - 46 Setting up the TV with your PC m & w fAuto Adjustment l>~l Screen Adjustment > Detailed Settings > VMore i£p _____ ^ Move B1 Enter Return Mode Backlight Contrast Brightness ^ Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the ENTER® button, to select "Picture". 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER® button. 3. When you are satisfied with your setting, press the ENTER® button. 4. Press the EXIT button to exit. Auto Adjustment Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. Auto Adjustment in progress Please wait. Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the ▲ or ▼ button to select “Auto Adjustment”, then press the ENTER® button. ♦ Screen Adjustment: Coarse/Fine The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the center of screen. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER® button. Press the ◄ or ► button to adjust the screen quality. Press the ENTER® button. ♦ Position Adjust the PC's screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position. Press the ENTER® button. Image Reset You can replace all image settings with the factory default values. Tools Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off PIP I Auto Adjustment ^ Move EH Enter -HP Exit TV *-1 m 50 93 w : Position > % Image Reset > ji-p ^ Move B1 Enter Ï) Return TV p 1 Position > 1 4l, 1 Image Reset >| # ¿s» ^ Move B1 Enter 5 Return English - 47 Using the WISELINK Function This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class (MSC) device. Press the POWER button on the remote control or your set. Connect a USB device containing JPEG and/or MP3 files to the WISELINK jack (USB jack) on the side of the TV. If you enter the WISELINK mode with no USB device connected the message “There is no device connected” will appear. In this case, insert the USB device, exit the screen by pressing the W.LINK button on the remote control and enter the WISELINK screen again. Only alphanumeric characters must be used as a folder name or filename (photo, music). The file system only supports FAT16/32 (The NTFS file system is not supported) Certain types of USB Digital camera and audio devices may not be compatible with this TV. Wiselink only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.) Before connecting your device to the TV, please back up your files to prevent th...

Herunterladen

Geben Sie zwei Ziffern: